Many of us here are limited by the length of our barrels because of transportation issues but our chambers are generally not nearly as long as the barrel for obvious reasons. The generally accepted C:B is .8:1 but should one be limited by a certain length barrel; will making a larger chamber make it...

The stungun is 350KV, forgot the K. Dongfang: Im not sure about your second part applying for me because oxygen shouldnt affect whether the gun sparks. The first maybe be true because ive never checked for that. The problem is not getting the right mix of propane to air, i have that calculated out a...

http://img153.imageshack.us/img153/1829/gun004ar6.th.jpg This is of the stungun with a pushbutton switch instead of the rocker it came with. http://img91.imageshack.us/img91/7755/gun001ub9.th.jpg Just a picture of the gun for reference. The duct tape is holding 5 couplings together which are used a...

Could the paint on the gun short the spark where the wires are connected to the screws? I am not really sure whats in paint but when i look into the chamber and spark the stun gun, i see blue rings around the two leads where the screws are.(I took the MAPP off before looking into the chamber for saf...

Yep, the fan is definetly sucking fresh air in.

Pat: When the stun gun sparks it has no problem igniting the mix and the sparks are set at about 1/8inch for each. Bob: I do have a fan and a ball valve for venting already but my question is, can the spent gasses actually interfere with sparking? That is almost what seems to be the problem because ...

It will until i shoot it, then it will usually take a while almost like it has to air out before it will spark again. When it begins to spark, it will continue to spark until shot again.

I would love to post a pic if i could but i do not have a decent camera at all. The gaps are very small, maybe 1/16 of an inch but i have scaled them up to as big as all 3 can be while still sparking until shot. The inside of the chamber is just 6 screws in pairs of 2 drilled into the chamber, thats...

This is my first post here but i've been browsing for a while now but i have ran into a bit of a problem. A little background before i start is in order i suppose. My gun is an advanced over-under combustion with: Chamber - 36" of 3" pvc Barrel - 60" of 2" pvc Chamber fan and 2" Ball valve for quick...