Question on steel ammo balls
19/32 is what you want.... 1/2" will be way too small...
My Cannons can be found by clicking the following link.
http://www.spudfiles.com/forums/viewtop ... tml#256896
http://www.spudfiles.com/forums/viewtop ... tml#256896
-
POLAND_SPUD
- Captain
- Posts: 5402
- Joined: Sat Oct 13, 2007 4:43 pm
- Been thanked: 1 time
1/2" bbs are 1/2" bbs - that is they should be 12.7mm
measure the exact ID of your barrel and substract the diam. of ammo from the ID of the barrel... if it's larger than zero then it will fit in it
lol it's just one of those threads that proves that imperial units are no good
measure the exact ID of your barrel and substract the diam. of ammo from the ID of the barrel... if it's larger than zero then it will fit in it
lol it's just one of those threads that proves that imperial units are no good
Children are the future
unless we stop them now
unless we stop them now
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
I know, I hate them, but hey, I can't go using Metrics around here... 
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
and why not? Metric units are way better. I live in Michigan, USA and I PREFER metric units.
Think of it this way.
1''=2.54cm or 25.4mm
So 1/2''=(25.4)/2 or 12.7mm. so, a 12mm ball would fit okay. and a 13 would be to big.
Although, thats assuming 1/2'' pvc has an ID of 1/2''.... which it does not.
Like stated before... 1/2'' pvc is ROUGHLY .6'' ID so.
0.6*25.4=15.24mm
So, for MOST 1/2'' pvc... the ID is 15.24mm get yourself a 15mm ball bearing... and use a sabot.
EDIT:
Seriously, when someone helps you... be nice to them, or soon, no one will help you. Also, we here on spudfiles will not spoon feed you answers. Use google and don't be lazy.
You will not be taken seriously around here until you show at least a little bit of effort.
Think of it this way.
1''=2.54cm or 25.4mm
So 1/2''=(25.4)/2 or 12.7mm. so, a 12mm ball would fit okay. and a 13 would be to big.
Although, thats assuming 1/2'' pvc has an ID of 1/2''.... which it does not.
Like stated before... 1/2'' pvc is ROUGHLY .6'' ID so.
0.6*25.4=15.24mm
So, for MOST 1/2'' pvc... the ID is 15.24mm get yourself a 15mm ball bearing... and use a sabot.
EDIT:
Seriously, when someone helps you... be nice to them, or soon, no one will help you. Also, we here on spudfiles will not spoon feed you answers. Use google and don't be lazy.
You will not be taken seriously around here until you show at least a little bit of effort.
jackssmirkingrevenge wrote:I wonder... if you put flammable vapours inside a lady... could you get her to diesel?
POLAND_SPUD wrote:Anything is possible with the proper 3-way valve.
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
Was I mean to somebody who helped me?
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
Well as far as i'm aware, this topic was resolved in the 4th post... 
I think you just ignored it or something, becaue every other post was kind of saying the same thing. If you know the I.D of your barrel, then you will know if the ball bearing will fit. If you don't know, look at a chart or measure it yourself. You don't need a tool anymore precise than a ruler to do this.
I think you just ignored it or something, becaue every other post was kind of saying the same thing. If you know the I.D of your barrel, then you will know if the ball bearing will fit. If you don't know, look at a chart or measure it yourself. You don't need a tool anymore precise than a ruler to do this.
Not mean per-say, you just chose to ignore the answers given to you, because you apparently did not want to go find a ruler.Gun Freak wrote:Was I mean to somebody who helped me?
Unless of course, you were asking for the diameter of the ball bearing, which in that case... is usually with in a few thousands of an inch of what it is listed as. aka: 1/2'' bearing would be in the 0.495''-0.505'' range.
jackssmirkingrevenge wrote:I wonder... if you put flammable vapours inside a lady... could you get her to diesel?
POLAND_SPUD wrote:Anything is possible with the proper 3-way valve.