stupid 2 Stage rocket prototype design...
- Lentamentalisk
- Sergeant 3
- Posts: 1202
- Joined: Tue Aug 07, 2007 5:27 pm
- Location: Berkeley C.A.
Not in the least. Think about it like this: if you can so much as put a dent in it, then a rocket engine, at insane temperatures, ridiculous velocities, and high pressures, will utterly destroy it. You would be better off with a washer (which is not a good choice btw, cuz it gets eroded too fast.)
Remember, this is a rocket, not a paper airplane. Its called rocket science for a reason. There is science behind it. You need something a little stronger than your average 3rd grader's paper mache (sp?) art project...
Remember, this is a rocket, not a paper airplane. Its called rocket science for a reason. There is science behind it. You need something a little stronger than your average 3rd grader's paper mache (sp?) art project...
Do not look back, and grieve over the past, for it is gone;
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
at home depot has 500 degree F epoxy putty, and it last awhile, wont be reusable though.
ok, that second comment is a bunch of shit, its not rocket science at the least, go to youtube and search how to amke a 2stage rocket motor, the fuel mixture (bcuz i dont think it tells you) is 3parts kno3 (stump remover) to 2 parts powdered sugar, mix it to gether well in a coffee grinder or pestle and mortar
Not in the least. Think about it like this: if you can so much as put a dent in it, then a rocket engine, at insane temperatures, ridiculous velocities, and high pressures, will utterly destroy it. You would be better off with a washer (which is not a good choice btw, cuz it gets eroded too fast.)
Well, he used cat litter and it works great...
I was thinking of clay.
haha that guy on youtube lives here in aus. I also use kitty litter for all my nozzles and plugs, then drill a hole thru them and the fuel till i reach my desired core length. I have had nozzles and plugs fail, ejecting fuel everywhere, but most cases that was my fault, either not compressing it enough, not having a thick enough plug, or deciding it would be a good idea to cook and cast the fuel straight into the pvc casing.
ive found kno3, sugar and sulfur work well together in the right ratios. the sulfur give the rocket extra power aswell as a neat spark trail when lit. Down side is it stinks to the high heavens
ive found kno3, sugar and sulfur work well together in the right ratios. the sulfur give the rocket extra power aswell as a neat spark trail when lit. Down side is it stinks to the high heavens
Cat litter is normally clay anyway but getting some moist clay and waiting for it to dry out will take considerably longer than compacting the pre dried grains of cat litter.Demon wrote:Well, he used cat litter and it works great...
I was thinking of clay.
- Lentamentalisk
- Sergeant 3
- Posts: 1202
- Joined: Tue Aug 07, 2007 5:27 pm
- Location: Berkeley C.A.
exactly my point. I never said that you had to use expensive aerograde materials, and ceramic nozzles are ideal. I am just saying that Al foil is not exactly rocket engine material. Have you ever tossed Al foil into a fire? It melts. It melts really fast. You really don't want your nozzle to melt away in the first 1/8th of a second. In October Sky they used steel washers, and even those eroded too quickly (granted they had much larger rockets)
Do not look back, and grieve over the past, for it is gone;
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
- mrbadexample
- Private 3
- Posts: 43
- Joined: Wed Oct 08, 2008 2:21 pm
to make a controlled "burn", once it ignites, it'll work it's way up through the hole (i imagine the hole is part of the combustion chamber), otherwise it may self extinguish or explode. i never made a rocket. and i'm sure if the hole isn't centered, it'll fly funny, nobody has mentioned this so far. the hole should be perfectly straight down the tube, any deviance from dead center will result in skewed flight, no matter how many fins, the thrust will direct it in the direction of the hole.
the aussie kid with the sandals making the kitty litter rocket is funny, could be a new "saying"... "go pound kitty litter!" LOL
the aussie kid with the sandals making the kitty litter rocket is funny, could be a new "saying"... "go pound kitty litter!" LOL
-
- Corporal 5
- Posts: 986
- Joined: Thu Jun 16, 2005 1:44 pm
- Been thanked: 1 time
Have you considered a hybrid rocket motor? They seem safer since there isn't anything inheriently explosive about 'em.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
You are right! I Just have to spend 300$, buy dangerous, very dangerous propellants,machine titanium or tungsten and convince my dad to make it!Have you considered a hybrid rocket motor? They seem safer since there isn't anything inheriently explosive about 'em.
(my Dad is an engineer and is not stupid)
hybrid rockets are NOT safer.
-
- Corporal 5
- Posts: 986
- Joined: Thu Jun 16, 2005 1:44 pm
- Been thanked: 1 time
Hur? Where do you get $300 and titanium and dangerous propellants? The one I saw used some PVC, some N20, and some ABS shavings.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
- Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
I think the hole through the center has more to do with increasing the surface area of the propellant than controlling the burn. It will also keep the heat off of the pipe walls more than an engine without a hole.