Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
i finally have all the parts to make my 6mm sniper rifle so i have started off making the barrel and obviously i'm making a silencer so i was just wonder if i should drill holes in the last 10,15 or 20cm of the barrel.
The specs are:
Chamber: 20cm of 15mm copper
Valve:1/2" qev
Barrel: 1m of 8mm aluminium pipe (6mm id) inside 1m of 15mm copper (which will have hole in aswell)
max operating pressure: ~250-300 psi
silencer length: ~40-60cm of 1.5" pipe
Well i'd say go 20cm, because most people say, make it as big as you can, and as big as your chamber. I'd drill lots of little holes in it, and insulate it with something realy absorbing! Cant wait to see the lil beast. ive allways wanted a 6mm copper sniper rifle
If you're silencer is going to be 40 - 60 cm long, i'd drill little holes like maybe 1/16 dia. along the whole length of the silencer, and as JSR dont forget to include baffling, I had a buddy make a silencer for a hi-point 9mm assault rifle and he used rolled up leftover carpet and his baffling.
Yea, that's definitely going to get you at least a tazer.
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>
facebook.com/biggrib
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
so i have started off making the barrel and obviously i'm making a silencer so i was just wonder if i should drill holes in the last 10,15 or 20cm of the barrel.
