find this lever which I can't see on any valves on this site. If you can see a photo, the lever in the vertical position is "Open". Rotated clockwise to the 90* position is "Closed."
In what position should I "weld" it to correctly mod the valve?
What should I do with this lever? I'm modding a valve and..
-
Novacastrian
- Staff Sergeant 2
- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
Piccy would be nice! You are not planning on welding a valve shut are you, that would be silly 
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
It might be the bleed "valve" (dont know the right word)
Coodude26 wrote:
People who laugh really hard at stuff that pisses you off/you getting hurt, who then say "I'm sorry, I can't stop" but you know they easily could.
Mr.C: That's not as easy as you think. It's like me kicking you in the balls and telling you to stop crying.
People who laugh really hard at stuff that pisses you off/you getting hurt, who then say "I'm sorry, I can't stop" but you know they easily could.
Mr.C: That's not as easy as you think. It's like me kicking you in the balls and telling you to stop crying.
Now most likely this is not the valve your using, however are talking about the component I have "boxed" in?
To tell you the truth I am unsure as to its purpose, so I couldn't tell you. I'll Google around and try to figure out its purpose.
To tell you the truth I am unsure as to its purpose, so I couldn't tell you. I'll Google around and try to figure out its purpose.
- Attachments
-
- Sprinkler_Valve_Lever.JPG (29.68 KiB) Viewed 3169 times
Resourcing off of another forum I find that it is bleed valve, just a variant from the screw in kind. Now as to what position to have it, haven't the foggiest.
NerfHaven Thread Check the last two posts.
NerfHaven Thread Check the last two posts.
-
clide
- Corporal 3
- Posts: 784
- Joined: Sun Mar 06, 2005 3:06 am
- Location: Oklahoma, USA
- Been thanked: 1 time
It is simply a mechanical switch that can push up the solenoid and trigger the valve. If you are modding the valve and leaving the solenoid in place then it should be in the closed position. If you are removing the solenoid then it doesn't matter at all because you will most likely be filling that hole with epoxy.
<a href="http://gbcannon.com" target="_blank"><img src="http://gbcannon.com/pics/misc/pixel.png" border="0"></a>latest update - debut of the cardapult
And, while I haven't contributed, can I just say, thanks for that last comment, it's really good to know people here can help.
Let politeness reign
Let politeness reign
<A HREF="http://www.paisleypeking.co.uk"><IMG BORDER="0" WIDTH="400" HEIGHT="64" SRC="http://www.paisleypeking.co.uk/images/s ... e.gif"></A>
