I have ordered a Mauler valve from Sgort for my newest cannon.
It has a 4" by 3' Chamber with countersunk and flush bushings on all the parts to match the valve. It has 2" aluminum cam locks and a variety of barrels.
chamber
<a href="http://s30.photobucket.com/albums/c325/ ... 168177.jpg" target="_blank"><img src="http://i30.photobucket.com/albums/c325/ ... 168177.jpg" border="0" alt="Photobucket"></a>
Pilot assembly
<a href="http://s30.photobucket.com/albums/c325/ ... 168204.jpg" target="_blank"><img src="http://i30.photobucket.com/albums/c325/ ... 168204.jpg" border="0" alt="Photobucket"></a>
Tennis ball barrel+ camlocks
<a href="http://s30.photobucket.com/albums/c325/ ... 168230.jpg" target="_blank"><img src="http://i30.photobucket.com/albums/c325/ ... 168230.jpg" border="0" alt="Photobucket"></a>
Mauler Cannon buildlog+teaser pics
So you're using a 2" nipple to connect the mauler output to the female camlock? You could've used a female camlock with male threads on there and avoid the nipple connector....you probably knew that... 
Gotta love those camlocks. Are you planning to run past 150 psi in this? The poly ones are plenty strong enough without having to go to the metal ones. The metal ones do look cooler though.
Gotta love those camlocks. Are you planning to run past 150 psi in this? The poly ones are plenty strong enough without having to go to the metal ones. The metal ones do look cooler though.
-
frankrede
- Sergeant Major 2
- Posts: 3220
- Joined: Thu Jul 20, 2006 9:47 pm
- Has thanked: 1 time
- Been thanked: 1 time
The camlocks were freebies, so I really can't complain:Dstarman wrote:So you're using a 2" nipple to connect the mauler output to the female camlock? You could've used a female camlock with male threads on there and avoid the nipple connector....you probably knew that...
Gotta love those camlocks. Are you planning to run past 150 psi in this? The poly ones are plenty strong enough without having to go to the metal ones. The metal ones do look cooler though.
I will probably have to get a few poly male connections for my other barrels
Current project: Afghanistan deployment
Oh no, certainly no complaining about freebies.. 8) The 2" poly males are reasonably costed at $4 each or so at Northern Hardware.frankrede wrote:The camlocks were freebies, so I really can't complain:Dstarman wrote:So you're using a 2" nipple to connect the mauler output to the female camlock? You could've used a female camlock with male threads on there and avoid the nipple connector....you probably knew that...
Gotta love those camlocks. Are you planning to run past 150 psi in this? The poly ones are plenty strong enough without having to go to the metal ones. The metal ones do look cooler though.
I will probably have to get a few poly male connections for my other barrels
Did you provide any engineering or logistical assistance in its construction?KRN wrote:yeah I know. its pretty awesome!
my man made that!
-
brogdenlaxmiddie
- Corporal
- Posts: 562
- Joined: Sun Jul 22, 2007 2:19 pm
Probably moral support. It always helps mestarman wrote:Did you provide any engineering or logistical assistance in its construction?KRN wrote:yeah I know. its pretty awesome!
my man made that!
