ok i built a gun using the sprinkler valve, and used 3 9 volt batteries to trigger the solanoid. it worked great for about 2 hours then stopped shooting the ammo out and now it just sort of "farts" it out and the ammo goes about 5' due to the air releasing very slow.
i thought i had a bad valve so i went down and got a new one, but same dang thing... changed the batteries and same dang thing...
do i just need to stop using the electric solonoid and "mod" my valve with the blow gun?
slow releasing problem
-
killagorrila99
- Sergeant 2
- Posts: 1100
- Joined: Tue Jul 25, 2006 2:35 am
- Location: Australia.
yea id say its ethier u need to mod it or someones been messing with your flow control. but to be sure just mod it 
"I'm sorry, Mr.Bush cant come to the phone right now, He's playing cleudo with Mr. Cheney And he has him in the Cupboard with a broom stick" -White house receptionist.
-
singularity
- Corporal 5
- Posts: 982
- Joined: Mon Jun 26, 2006 10:53 pm
- Location: someplace
- Contact:
if you mod it there will be no need for batterys, and modding the valve will make it open faster. open faster = better performance
ps - the "farting" your hearing is called honking, it is very common with un-modded valves becuase of the fact that water has more mass than air
ps - the "farting" your hearing is called honking, it is very common with un-modded valves becuase of the fact that water has more mass than air
be sure to check out my <a href="http://www.spudfiles.com/forums/ak-styl ... 9.html">AK Styled Vortex Gun</a> and my <a href="http://www.spudfiles.com/forums/at-4-t9627.html">AT-4 Rocket</a>
upcoming projects... finalized clip fed BBMG and ball point pen sniper
upcoming projects... finalized clip fed BBMG and ball point pen sniper
-
BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
Honking can also be casued by too much air comeing in, how is your chamber being filled? If it is from a compressor, try putting a flow valve on it, and seeing if that helps.
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
-
BC Pneumatics
- Sergeant
- Posts: 1053
- Joined: Tue Jan 18, 2005 6:55 pm
- Location: Fresno, CA
- Contact:
A flow valve is a type of valve that is used to constrict the amount of air that can pass thru it.
<a href="http://www.bcarms.com/"><img src="http://www.bcarms.com/images/store_logo.png" border="0"> </a>
did the mod and it works awesome now!
thanks guys
it shoots alot farther now compared to the battery switch i was running. i used to shoot a ball of masking tape down the street and land it in my neighbors driveway and make my kid chase it, but first shot after the sprinkler mod and the ball cleared the driveway and cleared his house and kept going...
thanks guys
it shoots alot farther now compared to the battery switch i was running. i used to shoot a ball of masking tape down the street and land it in my neighbors driveway and make my kid chase it, but first shot after the sprinkler mod and the ball cleared the driveway and cleared his house and kept going...
