28,8Kj ElectroThermal Gun! (Soon handheld)
I'm very thankful that someone made one of these, because mine will never be this powerful, and at the rate I'm going, it'll literally be years before I complete it. Supersonic wouldn't surprise me at all with a design like this.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
I made another more successful attempt to measure the velocity today.
I added several layers of sheet metal to the pendulum to make it "bullet proof".
The projectile penetrated two pieces of 20mm wood, two pieces 3mm aluminium, and finally 5mm of steel before it disintegrated.
In this test i charged the capacitors to their surge rating 1350v, for a total energy of 36,5Kj.
High Speed video of the test, its captured at 100FPS but the resolution is lower.
http://www.vimeo.com/769985
The failed test earlier.
http://www.vimeo.com/770135
I added several layers of sheet metal to the pendulum to make it "bullet proof".
The projectile penetrated two pieces of 20mm wood, two pieces 3mm aluminium, and finally 5mm of steel before it disintegrated.
In this test i charged the capacitors to their surge rating 1350v, for a total energy of 36,5Kj.
High Speed video of the test, its captured at 100FPS but the resolution is lower.
http://www.vimeo.com/769985
The failed test earlier.
http://www.vimeo.com/770135
- Attachments
-
- Damage by a 90g 12mm Solid Carbide projectile.
-
- The pendulum.
-
- The projectile turned into shrapnel after impact.
-
- Damage by a 90g 12mm Solid Carbide projectile.
-
- Bullet Trap
-
chartreusesnot
- Specialist
- Posts: 109
- Joined: Tue Jun 05, 2007 11:52 pm
anybody else noticing the completely massive recoil? It appears to be launching bricks and those square metal bars backwards...
_Fnord wrote:OMG you have broked teh universe!!!11exclamationpoint!1!
^^^^CLICK^^^^
-
chartreusesnot
- Specialist
- Posts: 109
- Joined: Tue Jun 05, 2007 11:52 pm
Dude... whats happening in that picture? did the recoil split that brick...?
_Fnord wrote:OMG you have broked teh universe!!!11exclamationpoint!1!
^^^^CLICK^^^^
-
Novacastrian
- Staff Sergeant 2
- Posts: 1603
- Joined: Sat Aug 11, 2007 6:59 pm
- Been thanked: 1 time
I herewith change my sig, sorry DYI but this truly takes the cake 
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
That's just spectacular, congratulations!
I love the way the chequer plate pattern is imprinted on the wood in this photo - amazing stuff, keep it up
I love the way the chequer plate pattern is imprinted on the wood in this photo - amazing stuff, keep it up
hectmarr wrote:You have to make many weapons, because this field is long and short life
Well, that sort of puts things into perspective. DYI has been well and truly beaten on the penetration front.
From that video, and guessing from the markings on your back board, it looks like you're doing about 260-270 m/s (860-880 fps), which is around 3200 Joules (2400 ft-lbs) of kinetic energy. That's a phenomenal amount from a 12mm barrel of that length, and it would seem you're achieving an average pressure of around 10000 psi - possibly more, I'm not sure how long your barrel is, so I guessed around 40 cm from the picture in the opening post - which is a full order of magnitude above anything anyone else has yet achieved (at least, that I can think of).
So, it's not actually supersonic, only about 80% of the way there, but no doubt if you used a projectile of somewhere under 50 grams, you could manage to break the sound barrier.
It's also a respectable 11% efficiency. Ooh, I can see more of these being made.
You sir, have what is no doubt one of the most kick-ass spudguns ever.
From that video, and guessing from the markings on your back board, it looks like you're doing about 260-270 m/s (860-880 fps), which is around 3200 Joules (2400 ft-lbs) of kinetic energy. That's a phenomenal amount from a 12mm barrel of that length, and it would seem you're achieving an average pressure of around 10000 psi - possibly more, I'm not sure how long your barrel is, so I guessed around 40 cm from the picture in the opening post - which is a full order of magnitude above anything anyone else has yet achieved (at least, that I can think of).
So, it's not actually supersonic, only about 80% of the way there, but no doubt if you used a projectile of somewhere under 50 grams, you could manage to break the sound barrier.
It's also a respectable 11% efficiency. Ooh, I can see more of these being made.
You sir, have what is no doubt one of the most kick-ass spudguns ever.
Does that thing kinda look like a big cat to you?
I would be interested in the possibililty of adding some water in with the aluminum powder, possibly somewhat little less powder to make room in your chamber. If you added a minimalist (or more even) burst disk, you could experiment with different slurry mixtures and see what works best.
This is based on the aluminum powder flashing to plasma and thus flashing the water to steam. The military has been prototyping the plasma/steam combo for several years and it supposedly has multimach potential if configured correctly. It may require more power to work properly than you have here, but, maybe not.
Again, very impressive work!
This is based on the aluminum powder flashing to plasma and thus flashing the water to steam. The military has been prototyping the plasma/steam combo for several years and it supposedly has multimach potential if configured correctly. It may require more power to work properly than you have here, but, maybe not.
Again, very impressive work!
I tip my hat to you sir, you've achieved what most of us will only ever dream of :salute:
I have to get my ass in gear on the [redacted] project now...
I have to get my ass in gear on the [redacted] project now...
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.