dentlauncher's pneumatic
Posted: Thu Dec 29, 2005 4:45 pm
this is my first pneumatic http://dentlauncher.tripod.com
Page 1 of 1
Posted: Thu Dec 29, 2005 6:55 pm
i am a man who loves safety features. NICE JOB.
Posted: Thu Dec 29, 2005 8:56 pm
pics not workin
Posted: Thu Dec 29, 2005 9:01 pm
i just fixed them 
8)
8)Posted: Thu Dec 29, 2005 9:35 pm
ooohhh, that thing is sexy!
Posted: Fri Dec 30, 2005 3:15 pm
the pic of the hole in the bucket was at 55psi, the spud went through both sides of the cat litter bucket and splatted on the wall
i dont understand what he means by safety featuressaladtossser wrote:i am a man who loves safety features. NICE JOB.
Posted: Fri Dec 30, 2005 5:09 pm
Ok I'm sorry if this comes the out the wrong way but a gun that size and power and the only pic of dmg is a "thin" plastic I belive it can shoot through alot more then that have you tried anything harder?
Posted: Fri Dec 30, 2005 7:15 pm
not yet, i dont want to make (more) holes in my garage
my other gun shot a nail through a 2x8 and it would have gone all the way through but is hit my steel backstop and got flattened.
my other gun shot a nail through a 2x8 and it would have gone all the way through but is hit my steel backstop and got flattened.
Posted: Fri Dec 30, 2005 7:16 pm
more pics coming soon 8) 8)
Posted: Fri Dec 30, 2005 8:50 pm
see those ball valves attached to the tank? that can possibly stop a unwanted discharge.
see those ball valves on the sprinkler valves? that too can stop a unwanted discharge.
see those ball valves on the sprinkler valves? that too can stop a unwanted discharge.
Posted: Mon Jan 02, 2006 4:23 pm
how would i be able to trigger the sprinklers at the same time?
The ball valves on the tank are to make the chamber smaller so it is easier to pump. I don't need huge chambers for my mini barrel.
The ball valves on the tank are to make the chamber smaller so it is easier to pump. I don't need huge chambers for my mini barrel.
Posted: Fri Jan 06, 2006 2:07 am
connect the sprinklers to a single ballvalve or blowgun using a T in the middle.THat way you should be able to set them off at the same time
Posted: Fri Jan 06, 2006 6:32 pm
does a blow gun have enough flow to trigger both sprinkler valves?
Posted: Fri Jan 06, 2006 9:52 pm
Yeah. I don't know how well it will trigger them, although it will certainly be better than the soleinoid that comes with them - if you want, you could use a small (3/8") ball valve... it'd be roughly the same price.