<div align="center">SWAMP PNEUMATIC
Provided By - Swamp
It has s 3'x3" chamber, a 2" baccara sprinkler valve (modded of course) and a 5'x2" barrel.
I think I was most pleased that the stand came out as well as it did. Amazing what you can do with a couple drawer slides and springs.
Things I could have improved:
1. elbow on the top of the sprinkler for the blowgun hose would have allowed me to have the chamber and barrel closer together
2. The stand it too light. I had to attach a cinder block.
3. Actually waited the week for the krylon to cure, oh well.
The stand. It's 2 circular pieces of particle board with 2x4's between them to hold the legs. Each leg has a slot between the 2x4's that it fits into. Even without bolts through the 2x4's it could support my weight easily.
The stand with the rotating disc attached to the top. It's just a 3/8" bolt through the entire thing with a couple of fender washers (and some grease) between the top 2 pieces.
The mount. It's 2 pieces of 2x4 cut to fit the barrel and chamber screwed into another 2x4. Attached to the sides are some 3/4"x3" project wood (the wood at lowe's/wherever that is actually straight and finished). You'll see the 2 springs attached to a couple of steel hooks.
Each half of the drawer slide is mounted to a piece of project wood. The bolt you see in the bottom piece is a carriage bold I tightened down until the top was flush with the surface of the wood.
Provided By - Swamp</div>
Swamp's Pneumatic
-
PCGUY
- Owner
- Posts: 1434
- Joined: Wed Aug 18, 2004 10:54 pm
- Location: Illinois
- Has thanked: 2 times
- Been thanked: 26 times
- Contact:
- Attachments
-
-
- stand_2legs.jpg (10.12 KiB) Viewed 10316 times
-
- stand.jpg (10.75 KiB) Viewed 10316 times
-
- stand_bolt.jpg (7.98 KiB) Viewed 10316 times
-
- mount.jpg (9.9 KiB) Viewed 10316 times
-
- mount_extended.jpg (9.98 KiB) Viewed 10316 times
-
- mount_separated.jpg (10.43 KiB) Viewed 10316 times
-
- valve_coke.jpg (11.47 KiB) Viewed 10316 times
Last edited by PCGUY on Fri Mar 10, 2006 9:54 pm, edited 1 time in total.
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).
thats an awsome stand. Its an intersting idea.
The gun is a real nice, modded pnuematic, nice and clean
The gun is a real nice, modded pnuematic, nice and clean
<img src="http://www.spudfiles.com/uploader/uploa ... 980630.gif">
My website www.freewebs.com/potato_cannon/
My website www.freewebs.com/potato_cannon/
-
aetherguy881
- Private 2
- Posts: 32
- Joined: Sun Jan 16, 2005 8:41 pm
- Location: Somewhere in CT
Extremely nice I love it
-
iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
omg, i love that gun. that stand is awsome
i got connections with the modfia, watch who ur talkin to noob.
talk to me on AIM at iamthwalrus3
talk to me on AIM at iamthwalrus3
-
bubblebathman
- Private 3
- Posts: 50
- Joined: Thu Sep 22, 2005 12:45 pm
- Location: USA
wat do u use as ammo and how far does it shoot 
-
GhostMonkey
- Private 2
- Posts: 26
- Joined: Fri Feb 10, 2006 11:48 pm
that thing is right and tight ...
-
_Hell_Storm_
- Private
- Posts: 17
- Joined: Tue Mar 21, 2006 8:36 pm
Niceee - Love it - little to big to be carrying about near me to much people and people steal near me but i might make a smaller 1 i will have it set up near my window so i can shoot stuff
-
clickclickdam
- Private
- Posts: 3
- Joined: Sun Mar 05, 2006 3:35 am
so thats what is protecting our coasts? i always wondered 
where do you live I LOVE THAT VIEW makes a great shooting range lol -
LucyInTheSky
- Specialist 2
- Posts: 293
- Joined: Fri Apr 21, 2006 11:46 am
Dose the recoil system not lower power slightly?
If your getting chased off a police dog, try not to run through a tunnel then onto a small see-saw then through a ring of fire. They are trained for that!
