Howdy folks! This was my first attempt at a Barrel Sealing Tee Valve and overall it turned out pretty nicely. I had quite a lot of difficulty getting this thing to seal air tight at first, but with some help from Izzy I was able to get this thing working. It's pretty much an exact replica of Izzy's Son of a Zonker but with my 360 Ball Valve Hopper on it. It's 1" Sch 40 with 3/4" Sch 80 barrel and hopper. I have a brass tee connecting my quick connect and blowgun to my chamber. I have 8 10-24 x 1/2" machine screws holding the end plug onto the tee. My diaphram is 3 1/16" neoprene rubber discs with no equilization hole. I have: bolt -> washer -> 3-ply diaphram -> washer -> lock washer -> nut. I can only get it up to ~70psi and I think this is beacuse my pilot valve can't dump the pressure over 70psi fast enough to actuate the diaphram. I was thinking about getting a 3/4" Watermaster or a QEV to solve this problem. Enjoy!
Click links for larger photos:
<img src="http://photobucket.com/albums/c253/Talo ... 38.jpg"><a href="http://i29.photobucket.com/albums/c253/ ... G_2138.jpg" target="_blank">View 1</a>
<img src="http://photobucket.com/albums/c253/Talo ... 40.jpg"><a href="http://i29.photobucket.com/albums/c253/ ... G_2140.jpg" target="_blank">View 2</a>
<img src="http://photobucket.com/albums/c253/Talo ... 39.jpg"><a href="http://i29.photobucket.com/albums/c253/ ... G_2139.jpg" target="_blank">Valve View</a>
First Barrel Sealing Valve
Super Duper Nice Job Talon!
Very clean construction also. Almost to nice I would be afraid to shoot it. jk What you think about doing a video of this cannon? LOL, nice imation of the supah with those screws in the Tee.
Very clean construction also. Almost to nice I would be afraid to shoot it. jk What you think about doing a video of this cannon? LOL, nice imation of the supah with those screws in the Tee.
Pimpmann22... yeah I am planning on making a quick video of this guy in action. Hopefully tomorrow I will break out the camera and make one. Haha ya it's my own homemade supah! Maybe I should sell it for $100 
Atlantis... wow thanks for that great compliment although I am sure you have seen nicer guns than this one! But I will take the compliment
Ya I really like the way the ball valve, blowgun combo looks and it's very functional.
Like I said, I am hoping to get more pics and videos up tomorrow
Atlantis... wow thanks for that great compliment although I am sure you have seen nicer guns than this one! But I will take the compliment
Ya I really like the way the ball valve, blowgun combo looks and it's very functional.Like I said, I am hoping to get more pics and videos up tomorrow
3" Supah on a 1"-.75" body sounds a bit OVERKILL! lol Not to mention very out of place on such a small bodied cannon.
At any rate, I see this cannon as a very clean setup and wouldnt suggest alteration. The cannon does look like it has oil or grease on it... There is "blackness" that can be seen in pic 3.
At any rate, I see this cannon as a very clean setup and wouldnt suggest alteration. The cannon does look like it has oil or grease on it... There is "blackness" that can be seen in pic 3.
Ya... still gotta get it a paintjob... but I don't want just all black like my last cannon... any suggestions? T
