paintball gun dimensions (Tippmann SL-68 II)
Posted: Sat Jun 08, 2019 7:18 am
I have taken measurements of a Tippmann SL-68 II paintball gun internals, mostly for my own record keeping but others may want to take advantage of this data. I couldnt be bothered taking measurements of the bolt-catch or trigger - tough tacky, figure it out from the pictures. Adjustments may be required, but the measurements are pretty close.
All measurements are in millimeters. Based on the Nelson valve.
All measurements are in millimeters. Based on the Nelson valve.
- metric dimensions
- internals group view 1
- internals group view 2
- internals group view 3
- internals group view 4
- cutout in bolt to prevent paintball chops
- cutout in bolt to prevent paintball chops
- inside the hammer
- inside the bolt
- trying to show that the bolt is made of 2 pieces, very tightly fitted
- valve closed
- valve open view 1
- valve open view 2
- valve open view 3
- inside body
- back side of body. valve housing area
- overall view of body and components 1
- overall view of body and components 2
- overall view of body and components 3
- overall view of body and components 4
- overall view of body and components 5
- view from back of body with valve installed
- view from front of body with valve installed
- longer spring is for the hammer. shorter spring is for the valve
- same springs, different view