Page 1 of 2
Diaphragm Setup
Posted: Mon Jul 24, 2006 4:29 pm
by Shrimphead
Here is the setup I am planning to use for my first diaphragm cannon. Does this look like it will work? I just want to be sure. Also, is there anything I should check before I glue everything up? Thanks.
Posted: Mon Jul 24, 2006 5:10 pm
by SpudStuff
you should try not to use glue. Get a female adapter and a threaded plug. but other than that the design will work
Posted: Mon Jul 24, 2006 5:23 pm
by Shrimphead
The blue thing in the picture is a male adapter.
Posted: Mon Jul 24, 2006 5:28 pm
by SpudStuff
then yes it will work
Posted: Mon Jul 24, 2006 9:24 pm
by Shrimphead
Anybody else? I really want more than one opinion just to make sure. It's all ready to be glued and I'm pretty sure that I can solve any problems that might come up without spending too much more money. I just want to be positive that there is nothing wrong with it.
Posted: Mon Jul 24, 2006 9:26 pm
by SpudStuff
nothing wrong with it
Posted: Tue Jul 25, 2006 11:36 am
by mark.f
SpudStuff, why dominate the thread??? Post count?
Can you give me some details on this picture? Honestly, you can't really answer anything until you give specific details on pipe sizes, diaphragm material, pilot valve flow, etc.
Posted: Tue Jul 25, 2006 12:00 pm
by SpudStuff
Shut up mark. i have mad many diaphram valves exactiy like this and they all work. you can use a small or large pilot opening wnd it almost always workd unless you reakky fuck something up
BTY I found a way to get aroung the password on you website
Posted: Tue Jul 25, 2006 12:12 pm
by CS
"BTY I found a way to get aroung the password on you website" ~SpudStuff
O, what? You want a cookie now? (jk)
Posted: Tue Jul 25, 2006 12:14 pm
by SpudStuff
no he said it couldn'tn be done
Posted: Tue Jul 25, 2006 1:16 pm
by mark.f
When did I say that?
P.S. - just for proof, what's the password then???
Back on topic, Shrimphead, what's the specifications on the valve?
EDIT: spelling.
EDIT^2: and I didn't type "Post Count?" in my post. Someone must have edited that in there, (cough cough Pimpmann cough...)
Posted: Tue Jul 25, 2006 1:49 pm
by SpudStuff
you said it the REAL SPUAh VALVE topic
ask Pimpmanni told him
Posted: Tue Jul 25, 2006 2:06 pm
by mark.f
Well, even if you did figure out the password... So what? All the pictures have been posted on spudfiles anyway, so their not "secret" anymore.
Once again, proove it. What's the password?
Posted: Tue Jul 25, 2006 2:14 pm
by CS
Mark, I dont know how in the hell he figured it, but he got it right. Tested it myself.
"EDIT^2: and I didn't type "Post Count?" in my post. Someone must have edited that in there, (cough cough Pimpmann cough...)" ~markfh11q
*Dun-dun-dun-dunnnn*
The Siberian computer hacker, "Muka-loka" strikes again!!! If your confused as a mother f*cker, go <a href="
http://www.spudfiles.com/forums/viewtop ... 3">HERE</a>
The password is 001-007. Simple, yet normally hard to guess something so simple.
Posted: Tue Jul 25, 2006 2:48 pm
by Shrimphead
Specs:
Barrel- 1/2"
Chamber- 2"
The gray is a 2" female adapter
The blue is a 2"-1 1/2" male adapter
The red is a 1 1/2"- 1" bushing
The diaphragm is a piece of 1/8" thick rubber that is used for making gaskets.
The pilot valve is a blowgun.