SpudFiles

Posted: **Fri Jul 13, 2007 4:02 pm**

I have been looking at all the hardware stores and I can not find a 2 inch pvc threaded street elbow. I have found them on mcmaster but they are 10 bucks, same with launchpotatoes.com. Anyone know of a store and or site that sells these for reasonable a price?

Posted: **Fri Jul 13, 2007 4:10 pm**

I got an elbow that was female threaded on one side and just stuck the shortest 2" galvanized steel nipple i could find on there.

Posted: **Fri Jul 13, 2007 4:16 pm**

I solvent weld everything, because threading it reduces the pressure rating quite a bit.

Posted: **Fri Jul 13, 2007 11:55 pm**

Modderxtrordanare wrote:I solvent weld everything, because threading it reduces the pressure rating quite a bit.

yes, but steet elbows are just so much better looking.
you could always get steel elbows if you realy want to....

Posted: **Fri Jul 13, 2007 11:58 pm**

you can get non-threaded street elbows... i used one on my piston cannon.

Posted: **Fri Jul 13, 2007 11:59 pm**

rednecktatertosser wrote:you can get non-threaded street elbows... i used one on my piston cannon.

could we have a link to that gun please?

Posted: **Sat Jul 14, 2007 12:05 am**

that gun isnt posted yet. ill go take some pics real quick and post it though, ive been meaning too.

Posted: **Sat Jul 14, 2007 12:48 am**

You can get all types of crazy elbows at <a href="http://www.plumbingsupply.com">Plumbing Supply</a>

Posted: **Sat Jul 14, 2007 4:31 am**

Ewings Irrigation supply.

Posted: **Sat Jul 14, 2007 7:09 am**

i do not know if threaded elbows are easy to get. i always solvent weld also. so i wouldn't know but try bunnings or a specialty plumbing store.

Posted: **Sat Jul 14, 2007 12:35 pm**

I need it to be threaded so it can attach to my piston valve i have.

Posted: **Sat Jul 14, 2007 2:24 pm**

Solvent weld a male adapter to it, unless you are going for the somewhat compact feeling.

SpudFiles

2 inch elbows

2 inch elbows