Great Idea, I cant find anyone that has tried it !
So I was on Hgdt running some simulations on my advanced combustion gun thats only has a end coupler and ball valve on it so far...... I found that I needed a 10 foot barrel for a .8:1 ratio, and I had this great Idea, id split the barrel into multiple parts via unions, this would allow for multiple barrel lengths, and Multiple burst disks. My first union would come directly out from the chamber, this would be the first burst disk and a optinal barrel length for noise making, Then after the first union, 5 inches after it, I would have another union , with another Burst Disk. With these to unions and burst disks, comes a handy chamber to hold smaller projectlies, 5 feet from the last union would be the last union and burst disk, Giving me a interechangle barrel lenth from one pipe. Just a union/burst disk and no other piping would be for noise making, and the union in the middle of the chamber could be for loud yet somewhat fast projectiles, and the whole barrel together for long distance. But here comes a question, Lets say my first burst disk fails at 50 psi, my 2nd one fails at 65 and the last fails at 75, Or vice verca, what would multiple burst disks do ?, would it be a increase in Loudness ?
I don't think you understand how a burst disk works. If you tried what your saying here you would find that your projectile woulld get stuck somewhere in the barrel.
Last edited by Radiation on Wed Mar 18, 2009 10:50 pm, edited 1 time in total.
-
mark.f
- Sergeant Major 4
- Posts: 3628
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 52 times
- Been thanked: 53 times
- Contact:
Radiation is right. A projectile catching on one of these fittings (especially the furthest one) has the potential to rip your barrel to hell and gone. It's one thing to say "Sure, it's safe because they're pressure rated", but they're definitely not rated for projectiles hitting them at about 300 fps. 
I understand how a burst disk works, I might have not been clear enough in my post what I mean is, One the first layer is broke that would begin moving the proectile, now the pressure is at the second burst disk and the projectile is at the second burst disk, now it has to overcome the second obstalce and once it does overcome it is should ram through the last disk with ease.
So what you guys are saying is that the projectlie will catch on a union ?
Edit by jrrdw.
So what you guys are saying is that the projectlie will catch on a union ?
Edit by jrrdw.
It doesn't work that way your burst disk only works if it's between the chamber and the barrel. In your example the projectile is on the wrong side of the disk. Also burst disks take quite a bit of energy to burst. If you put multiple disk seperated by different lengths you would get diminishing return because you are expending slot of energy every time a disk bursts.
Edit: now that's not to say you can't split the barrel, I have done this but you may blast off part of your barrel. It may break or it may just seperate.
Edit: now that's not to say you can't split the barrel, I have done this but you may blast off part of your barrel. It may break or it may just seperate.
Yeah you should just drop the multiple disk idea. If you want a louder bang you need a burst disk that bursts at a higher psi (assuming your cannon can perform at a higher psi) and no barrel. Remember louder does not mean you have a more powerful gun, it means you have a highly inefficient gun that is losing a lot of energy to an unfocused blast. A longer barrel is more efficient, more powerful (to a point) yet much more quiet.
I'm still puzzled why you are still chasing this multiple burst disk thing. I actually have some ideas around how to use a second burst disk effectively but not in the context you are describing.
Just ideas, interesting cool sounding ones, very unproven, not willing to stake reputation on at this point kind of ideas.... 8)Rob748 wrote:Hows that starman ?
Maybe you would, but not until after I try it first my man... 8)Rob748 wrote:well I might be interested in trying one of ur ideas....... lol