Page 1 of 1
Injection gas electric automatic Please Help !!! andurilmike
Posted: Sat Jul 14, 2012 10:13 pm
by andurilmike
My question is, is what I could not put a motor for pressing the tube with just a bouton.Des ideas?
[/img]
http://img140.imageshack.us/img140/4075/dscf2008y.jpg [img]
Shot at 2012-06-27
please looks at the picture
Sorry for my English but I use qoogle translation, I have already asked on other forum but have no idea
thank you
A +
andurilmike
Posted: Sat Jul 14, 2012 10:49 pm
by pneumaticcannons
Rc servos would be your best option IMO. I have a rig in mind but I can't illistrate it at the moment. I'm sure that with a bit of mechanical enginouity, you can figure it out yourself before I have time to crank out a microsoft paint diagram
Posted: Sun Jul 15, 2012 1:18 am
by jackssmirkingrevenge
Posted: Sun Jul 15, 2012 3:24 am
by POLAND_SPUD
yeah go for a solenoid valve - using an rc servo would be ridiculous
Posted: Sun Jul 15, 2012 7:04 am
by pneumaticcannons
Don't gas canisters leak a bit when depressed by desighn? Even if the plastic tip is sealed.... I probably just have a slightly defective one
'twas the reason I suggested a couple of rc servo's. Sorry if I caused any mishap andurilmike. Solenoids all the way if you can.
Posted: Sun Jul 15, 2012 11:14 am
by jimmy101
Pneumaticcannons makes a good point. I would be worried that these refill canister's valves are not designed to be opened continuously. Some testing would be in order to insure they don't leak. Ir they don't leak then a solenoid valve would be a good approach.
If they do leak you might consider an intermediate storage tank. The tank could be metal (or perhaps PVC, especially if the fuel is butane). You fill the intermediate tank with the canister inverted so you are transferring liquid. Fuel is taken from the intermediate tank via an electrically controlled valve.
Posted: Sun Jul 15, 2012 3:48 pm
by andurilmike
Translating good I not understand everything but I think I understand you most want me using valve selenoid but the problem is that I see that it is a screw while I was looking for a press pipe which releases gas from the gas cartridge universal.
thank you
A +
andurilmike
Posted: Sun Jul 15, 2012 4:06 pm
by jackssmirkingrevenge
Instead of using the lighter refill type butane cannisters, why not get something like this?
Posted: Fri Oct 12, 2012 1:01 pm
by andurilmike
Is or what it found.
thank you
A +
Posted: Fri Oct 12, 2012 2:06 pm
by jackssmirkingrevenge
I don't understand but you're welcome
Posted: Fri Oct 12, 2012 3:52 pm
by andurilmike
Or find it on the photo, then butane.
[/quote]
merci
A +
Posted: Fri Oct 12, 2012 4:16 pm
by jackssmirkingrevenge
Posted: Fri Oct 12, 2012 5:18 pm
by andurilmike
And pipe it or?
thank you
A +
Posted: Sat Oct 13, 2012 12:05 am
by jackssmirkingrevenge
http://www.ebay.com/itm/2M-X-6mm-AIRLIN ... 27bf46285f
aller dans un animalerie, ils ont plusieurs tailles de tubes pour aquariums.
