Clear Airsoft Strafer

[noname]

My newest airsoft strafer, thrown together for the competition. It utilizes a clear 1" SDR 21 chamber, a spring powered plunger, ghetto cut (but very clean) threads in the back, a 2 foot 9/32" brakeline barrel, a fake silencer that looks really kickass, a modified blowgun in a PVC handle, some clear epoxy, a clear vortex block with no shrouds and the front filed away for better feed, and some other stuff. It's about as strong as the Pocket Strafer but has a higher ROF and lasts longer (compared to the 1 second of firing out of the Pocket Strafer ).

Edit: Sorry for the bad pics....

[Redcoat]

woah those first couple of photos are blurry but its a nice gun.


video please.

[Insomniac]

Nice gun, but is that barrel angled upwards or is it just the photo?

[noname]

I'm extremely sad I can't get a video. As you can see from the pics, my camera is shitty enough as it is.
The barrel is angled a tiny bit to increase long range accuracy, but the camera exaggerates it.

[Suppressive Fire]

How is the accuracy?

[noname]

With .2 g BBs I get a spread of about 2" from 40 feet.

[subterranean]

speaking of accuraccy, i was hoping to replace the barrel on my airsoft vortex bbmg(currently it's 5/16 brakeline which is very inaccurate), but i need to know which type of barrel is the best choice. So far heres the barrels im considering....

-an actual airsoft gun barrel(probably 8" long to save money)

-8mm OD copper pipe

-9/32 brakeline

i hope that those three will perform better than what i have, but i want to hear some opinions on which is best accuracy wise as well as price.

EDIT: noname- is there any uncommom brakeline size that might be better tham 9/32", i ask this because i know of a local place that sells specialty size brake and hydraulic line.

[noname]

9/32" brakeline and 8 mm OD copper tubing have the same ID, give or take 5 hundredths of an inch. An airsoft barrel is probably a little tighter. An airsoft barrel will also be the most expensive. Copper tubing is next, and brakelin will be the cheapest, at about $2.50 for 3 feet. Brakeline will also mean you have to make absolutely NO modfications to the gun; or even taking out the vortex block. 9/32" brakeline sildes perfectly into 5/16," and friction keeps it from sliding out or slipping in any way. I'd go with the brakeline, hands down, but that's just me.

[Boomer_]

My favorite part is how you threaded that clear pipe. I wish I had those kinds of tools to work with. Great job.

[noname]

Dude, I used a blowtorch and a steel pipe nipple! I heated the pipe and forced the nipple in with pliers, I don't know what kind of specialty tools you're talkin' about!