was not expecting that 
BFG #7
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
Airlines finished, now testing the magazine feeder setup, some issues but nothing I can't fix. Test firing at 90psi went straight through 1/2" plywood was not expecting that
was not expecting that -
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
more spring tension on the loader arm then had to add extra spring to close the 'bolt', a small profile change to the ammo pusher edge and the bolt tube edge as well and it seems to work smooth now. Only a 2 second video so you might want to play it in slomo.
[youtube][/youtube]
[youtube][/youtube]
Last edited by jrrdw on Sun Apr 23, 2017 3:47 pm, edited 1 time in total.
Reason: Embedded video.
Reason: Embedded video.
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
Almost finished now, need to make a catch to hold open the spring loaded arm on the magazine so I can load it easier, move air inlet to side as it gets in the way on the bottom when you put it down, and make a stand to rest it on and hold it upright when shooting, sort of a bipod/monopod thingy, it is shootable from the shoulder but it's pretty heavy.
Made and added a forward assist lever for chambering first round, works really nicely
Time so far I would guess at 200 hrs, cost $10 for the 1913 rail and the laser pointer, the rest was free
Used that piece of 1/2" MDF to shoot at and it goes straight through at 100psi. :bounce: now I need to build a target that can safely catch the BBs
Made and added a forward assist lever for chambering first round, works really nicely
Used that piece of 1/2" MDF to shoot at and it goes straight through at 100psi. :bounce: now I need to build a target that can safely catch the BBs
Last edited by farcticox1 on Sun Jan 07, 2018 3:59 pm, edited 1 time in total.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
Once again, fantastic job! Are you thinking of painting a uniform color? Seems almost a shame...
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
No,I'll just let it shine 8)jackssmirkingrevenge wrote:Once again, fantastic job! Are you thinking of painting a uniform color? Seems almost a shame...
Might try some open sights on it instead of the sight thingy, it really has no function
I'll post it in the showcase when I'm happy with it, with dimensions and weight etc.
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
A few more mods, I think the sight could work just need to play with it a bit more
Added a post to the front
Side entry air
Added a post to the front
Side entry air
Last edited by farcticox1 on Sun Jan 07, 2018 4:02 pm, edited 1 time in total.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
Au naturel is best 
The problem with the sight is the tiny radius, front and rear sights are too close together for meaningful accuracy.
The problem with the sight is the tiny radius, front and rear sights are too close together for meaningful accuracy.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
Ah yes, long gun accuracy from a short gun layout, luckily not what I was going for 8)
-
jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
Pretty sure you can fit a little cheapo Chinese holographic sight in that shroud...
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
It's pretty good how it is now, moved the pointer to below the barrel where I originally intended it and set the sights and pointer up, fired 3 shots at 14' and wondered where 2 & 3 went until I realized they went through the same hole. I think it's time to call it finished and move on to the next one, single shot 6mm airsoft with 3/8" QEV, 400mm barrel. Going for simple and light weight. MP5 sort of scale.
Last edited by farcticox1 on Sun Jan 07, 2018 4:02 pm, edited 1 time in total.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
Always the most difficult decision to makeI think it's time to call it finished and move on to the next one
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
farcticox1
- Sergeant
- Posts: 1080
- Joined: Sun Mar 31, 2013 12:37 pm
- Has thanked: 69 times
- Been thanked: 96 times
except I'm still tweaking it, I added a safety
