First unscrew the "pink thing on the back of the valve head", then unscrew the pump head from the valve.
Schrader threads to small?
-
jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
First unscrew the "pink thing on the back of the valve head", then unscrew the pump head from the valve.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
Those pumps are meant to fill small volumes to an exact pressure so the gauge should be pretty reliable. In my experiments I was confident of both fuel and air metering, so I figured the problem was with ignition.
Are you sure your spark gap isn't too big? If it can ignite a 1x mix, then I'm guessing it's a little wide.
Are you sure your spark gap isn't too big? If it can ignite a 1x mix, then I'm guessing it's a little wide.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
if it's igniting at 2x and not at 3x, I'm guessing it's the ignition that's the problem.
hectmarr wrote:You have to make many weapons, because this field is long and short life
It hasn't ignited at a 2x yet, but I can get a 1x to easily ignite... I don't know what's wrong, I'm sure the ignition isn't the problem, its a large piezo capable of atleast a 5x mix.
Once I get home, I'll use my tazer and that will for sure tell me if it's ignition, which I doubt it is. I'll try a few more times in a while.
Once I get home, I'll use my tazer and that will for sure tell me if it's ignition, which I doubt it is. I'll try a few more times in a while.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26183
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 547 times
- Been thanked: 326 times
hmm... small hybrids seem to be running into the same issues.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Lentamentalisk
- Sergeant 3
- Posts: 1202
- Joined: Tue Aug 07, 2007 5:27 pm
- Location: Berkeley C.A.
I think you may still not be depressing the pin. The 1x would work, because you weren't actually pumping any air in. Though the gauge on the pump goes up, you are really just compressing the air in the hose of the pump.
Then again, I can't see your cannon.
Then again, I can't see your cannon.
Do not look back, and grieve over the past, for it is gone;
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
Lenyamentalisk, I got it working once Jack told me about the unscrewing of that thing.
Now what's giving me problems is the spark gap itself, the spark is jumping from the brass rod to the female adapter, so it's not sparking inside my chamber, I'm tired of this adapter beacause of all the problems it's giving me.
I'm making a new adapter with the same principle, I'll make sure to space out the spark gap from the metal around as much as possible and I'll get an extra long schrader so I dont have anymore problems with it.
Update;
Bought some 2 inch long schrader valves, that'll give me more than enough space, this cannon should be up and running by next weekend. I'm gonna work on the handles and the integrated recoil absorbtion for the contest
Now what's giving me problems is the spark gap itself, the spark is jumping from the brass rod to the female adapter, so it's not sparking inside my chamber, I'm tired of this adapter beacause of all the problems it's giving me.
I'm making a new adapter with the same principle, I'll make sure to space out the spark gap from the metal around as much as possible and I'll get an extra long schrader so I dont have anymore problems with it.
Update;
Bought some 2 inch long schrader valves, that'll give me more than enough space, this cannon should be up and running by next weekend. I'm gonna work on the handles and the integrated recoil absorbtion for the contest
Bump, update.
I just poured in the epoxy onto my new epoxy plug, this time I made sure that I had enough schrader sticking out of the plug to ensure that I can get air through. I'll put it in my heater for about 2 hours to speed up the curing. I'll post pictures tommorow, and I'll begin testing in about 3 days.
I just poured in the epoxy onto my new epoxy plug, this time I made sure that I had enough schrader sticking out of the plug to ensure that I can get air through. I'll put it in my heater for about 2 hours to speed up the curing. I'll post pictures tommorow, and I'll begin testing in about 3 days.