Page 1 of 1

Need Help!!! Mini Spud Gun not firing properly!

Posted: Fri Jul 27, 2012 7:29 am
by doomburger
Hey guys! This is my first post here on this site :)
I have just created a small spud gun with a pill bottle, a pen, a disassembled BBQ lighter thing, and 2 nails. I stuck the nails in the pill bottle and then used the disassembled lighter and attached the two wires to the two nails. I then hollowed a pen and used it as a barrel in the front, and then taped that whole thing up. I have clicked the lighter thing and electricity passes between the nails.
All good so far!
However, this is the problem: I sprayed some (not very much) deodorant into the bottle, but it didn't fire. I then blew into the bottle and tried again, but still no luck. Listening to some YouTube videos, I decided to give alcohol a try. I put some 70ish% alcohol onto a q-tip and rubbed it over the inside of the medicine bottle. I then shook it, blew into it, capped it, and pressed the button. Sparks there, but nothing else is happening!!!
Could someone help me?
Thanks a lot!

Posted: Fri Jul 27, 2012 7:32 am
by sagthegreat
are you sure that it is sparking?

Posted: Fri Jul 27, 2012 7:33 am
by jackssmirkingrevenge
deodourant bad.

proper syringe metering good.

http://www.spudfiles.com/forums/how-to- ... 22301.html

Make sure you have a good 4 to 6mm of spark gap too.

Posted: Fri Jul 27, 2012 7:44 am
by doomburger
Wow thanks a lot jacks. I need to get my hands on a syringe first and also some Butane. By the way, where could I get some Butane/syringes? Thanks again! :)

Posted: Fri Jul 27, 2012 7:52 am
by jackssmirkingrevenge




I'm sure you can get stuff locally though, at which sort of shop will depend on your location. In Europe you can get syringes from pharmacies or garden supply shops, and lighter refill cans of butane from supermarkets, ironmongeries and tobacco shops.

Posted: Fri Jul 27, 2012 8:01 am
by doomburger
Will try to look around my area, but I may have to order them from amazon. Thanks for the help!

Posted: Fri Jul 27, 2012 5:26 pm
by jimmy101
For a full size gun you want a 60cc syringe. For a mini a 5 or 10cc would be better. The store with the syringe will also have blunt needles, which are handy.

1. Try hardware stores that sell animal (horse, cow, ...) supplies like;
http://www.tractorsupply.com/
http://www.tractorsupply.com/producer-s ... -2-1019800

2. Printer cartridge refill kits often come with 10 or 20cc syringes.

looks like a 25cc syringe + needle + ink for $8. Check you local big box store and you can probably find a kit locally and avoid shipping costs.

Re: Need Help!!! Mini Spud Gun not firing properly!

Posted: Mon Jan 08, 2018 3:25 am
by sophiamasona
Thank you jackssmirkingrevenge I have purchased zippo fuel from here and it was a good one so far.

Re: Need Help!!! Mini Spud Gun not firing properly!

Posted: Wed Jan 17, 2018 12:02 pm
by selersanthony
sophiamasona wrote:Thank you jackssmirkingrevenge I have purchased zippo fuel from here and it was a good one so far.
Are you recommend it?