SpudFiles

This is my mini that I made out of some clear plastic tubing, a lighter nose with an airsoft barrel sleved inside, a peizo from the same lighter, and a threaded cap that fits the pipe.
My tweaked lighter fueling system, once again from the same lighter, is pictured in the first photo.

Thats a nice looking mini. usually nini's are filled with duct tape and hot glue and are just ugly..... but thats pretty nice looking!

i agree with the above statement.

and thats a cool fueling system, too!

Thanks!
Also, for a different and cheap mini fuel, I found that swabbing the inside with rubbing alcohol will fire it quite well.

how exactly is the butane transferred into the chamber? do you just push the butto on the lighter?

Yes, the tubing helps to not waste butane.

Say this is a good looking mini, the muzzle break really stands out. It kinda reminds me of one of those old rotory clip machine guns out of a gangster movie. I'de be plinking marshmello's off of straight pins sticking up through cardboard or something. Good one!

Sadly the clear tubing that I made the chamber out of begins to crack after a few shots, so I will have to find some clear 3/8" pvc to make a stronger one.*sniffles* Anyways, does anybody know other cheap clear materials that could be used for an application like this?

use a pill bottle to make a larger chamber and more powerful gun.

I already have one made out of a clear film canister, I was thinking tubing or pipe.

umm, use some large diameter pressure hose if you have some laying around.

and is that clear pen circular on the outside with a hexagon on the inside?
if it is, i used the same kind of pen for a bb barrel, but it cracked, too. i just like it cause i could see the flames i my mini, it is fun to show of your flaming guns!

Um, that is some 3/8 inch tubing of an unknown material (it smells like tar when cut), not a pen tube.
And yes, I might have some clear hose in my shed, but I couldn't find it last time I looked in there. I could get some next time I go to the hardware store.

well, if you are going to go to get something, dont get hose, but another thick clear material. i love them clear chambers!

so....doesnt the lighter gets on fire or something
i dont thing ittlbe safe like that
nice gun , im making one, ima make a handle so it can be easyer to fire

I just stick the lighter in the back of the gun, fuel it, pull it out, and cap it. No risk of lighter fire.