Making a 2" Piston without O-Rings or Sheet PVC

[bigbob12345]

well just make sure the orings are an absolute perfect fit, you may have to order off the internet so you can get the presice size that wouldnt be avaible in harware stores.
you want them to seal perfectly and yet have very low drag, so the pipe has to be very smooth and it has to be lubed up like nuts.

chamber sealers are fidgety but if you devote to one im sure you can do it.

[pizlo]

smooth and it has to be lubed up like nuts.

... any links as to where I can get my hands on some nut lube, and then get some lube on my nuts?

[bigbob12345]

and just to make this long enough

[Counterstriker]

My bad! I was completely wrong.. I meant Barrel Sealing Tee Valve .. Jeez.. Sorry..

[bigbob12345]

and again to make it long enough

[Counterstriker]

Thats what I get for not looking it up... Well atleast the only thin I got wrong was the name.. So now o'rings aren't a giant priority I guess?

[bigbob12345]

nope
you have chosen a more rewarding path, young one
Im probably younger than you

[Counterstriker]

Haha! I will probably start working this weekend, At least the Tee. As for the age its cool you might be older I am only 15

[bigbob12345]

Well Im 14 so yeah...

do you know what you are going to use for the piston

[Counterstriker]

Well Im 14 so yeah...

do you know what you are going to use for the piston

1 1/2" pvc with rubber and metal washers.. throw some nuts in there.. I'll start a log.

[pizlo]

Keep your nuts lubed well.

[Blitz]

just a heads up, barrel sealers are easier to construct and GGDT say they yeild a little higher performance but i realize you will probably ignore this and go along with your plans

For what it's worth, chamber-sealing guns do have one inherent advantage... true breech-loading.

[Counterstriker]

Keep your nuts lubed well.

Ahh, I will be sure to do that!

[bigbob12345]

lube the log too, wouldnt want it getting stuck

[Maniac]

Im suprised JSR hasnt responded to this topic.