new gun
i built a combustion launcher that is shoulder fired with a missle toggle on/off built under the stock and a hidden on/off main bypass in the stock also. the pushbutton is in the pistol grip handle witch holds the battery for the 100,000V stungun. the chamber is 2''*3'', 4''*16'', and 3''*5.5''. it comes apart from the ign. handle using a 2'' sch 80 union and breech loads using a 3'' c.o. and 3'' male adapters. the 4'' chamber is clear pvc and the gun and fittings are about to be painted black and yellow. ( the ball valves are yellow) .................anyway i was waiting to paint to see if i liked how it shot and today i got the first chance is weeks. i shot a 2'' potato slug using a 4'11' rifled barrel at my 3/4'' plywood target from 15yards away and it blew the back of my target out and recessed the bullseye about 1/2'' and you can now see light through it. WILL POST PICS AS SOON AS POSSIBLE INCLUDING TARGET.
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
Not a question...
-
longshot1068
- Private 4
- Posts: 86
- Joined: Mon Nov 07, 2005 5:08 pm
- Location: Three Rivers, Ma. USA
I just started to build one today, it is my first real 'tater gun. I have the barrel(removeable) and the chamber built, as well as part of the propane meter built so far- but need some more parts before I can finish it. I hope my gun will be as nasty as yours. I have to get an ignitor and a propane torch ( and the fittings to mod it onto my injector setup), then I have to put my 92 mm case fan in there and it will be ready to go. Very basic by comparison to some of these works of art on this forum, but a noob has to start somewhere.
