break barrel breach loading?

A place for general potato gun questions and discussions.
Post Reply
User avatar
Brian the brain
Moderator
Moderator
Netherlands
Posts: 3496
Joined: Mon Dec 05, 2005 2:06 am
Location: Holland
Been thanked: 3 times

Tue Mar 21, 2006 3:51 pm

I've tried this type of breech in a gun (that can't be discussed because of forum rules)
without any rubber seal it was airtight!!! just metal to metal.I think it's because the way the barrel rotates..it can apply a lot of force onto the seal.
When done correctly it will "jam" shut, not needing anything to keep it closed.
Attachments
The breach is closed.Notice the pivotpoint is below the barrel.
The breach is closed.Notice the pivotpoint is below the barrel.
breakbarrel closed1.JPG (12.18 KiB) Viewed 3626 times
here the breach is opened.accepts very long projectiles this way
here the breach is opened.accepts very long projectiles this way
Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!

Can't ask for a better compliment!!
Top
User avatar
rna_duelers
Staff Sergeant 3
Staff Sergeant 3
Posts: 1739
Joined: Mon Sep 26, 2005 7:07 am
Location: G-land Australia

Thu Mar 23, 2006 2:20 am

ohhk,well that idea is taxed!looks simple and i think i might give it a try.thanks mate.
Top
crazykid
Private
Private
Posts: 12
Joined: Sat Apr 14, 2007 8:22 pm

Wed May 23, 2007 7:24 pm

Hey can i have some instructions plz. i like the idea but dont know how to build it. wouldnt it be better to have a seal
Top
GinsuGuy585
Private 2
Private 2
Posts: 28
Joined: Wed May 16, 2007 11:29 pm

Wed May 23, 2007 10:39 pm

You could have a repair coupling behind the break with a spring behind it. The hinge that the barrel is attached to could also have a spring to open it when the repair coupling is pulled back.


One sec and I'll make a diagram...
Top
goathunter
Corporal 2
Corporal 2
Posts: 675
Joined: Thu Feb 15, 2007 9:20 pm

Wed May 23, 2007 10:43 pm

Crazykid, take a look at mine, it's similiar to Brian's but with a few twists to make it work on a pneumatic. http://www.spudfiles.com/forums/goats-gun-t7859.html
Any questions just ask me.
Top
GinsuGuy585
Private 2
Private 2
Posts: 28
Joined: Wed May 16, 2007 11:29 pm

Wed May 23, 2007 11:01 pm

Here are the mods I propose:
Attachments
The green repair coupling is foreward, but when the barrel is pushed down the angle of approach will cause the coupling to be pushed back untill the barrel is fully closed, at which point it will move forward and lock onto the barrel under the spring's pressure
The green repair coupling is foreward, but when the barrel is pushed down the angle of approach will cause the coupling to be pushed back untill the barrel is fully closed, at which point it will move forward and lock onto the barrel under the spring's pressure
breakbarrel_open_117.jpg (38.82 KiB) Viewed 3346 times
Closed, the green repair coupling is pushed foreward over the barrel by the orange spring. The orange spring at the hinge is in tension and will cause the barrel to spring up when the black bolt is pulled back (moving the repair coupling back)
Closed, the green repair coupling is pushed foreward over the barrel by the orange spring. The orange spring at the hinge is in tension and will cause the barrel to spring up when the black bolt is pulled back (moving the repair coupling back)
breakbarrel_closed1_184.jpg (12.73 KiB) Viewed 3346 times
Top
User avatar
Bubba05
Corporal
Corporal
Posts: 518
Joined: Wed Mar 21, 2007 9:05 am

Thu May 24, 2007 5:51 pm

I experamented with something like this and couldnt get the darn thing to seal properly! but now you got you diagrams up i might go and dig it up and have another go!

Bubba
Top
crazykid
Private
Private
Posts: 12
Joined: Sat Apr 14, 2007 8:22 pm

Fri May 25, 2007 5:44 pm

ginsuguy is that design airtight because of the coupler. if it is Than i make it . Do you know good ammo fo 2in barrel i need that 2
Top
iknowmy3tables
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1596
Joined: Fri Dec 15, 2006 3:57 pm
Location: maryland
Has thanked: 3 times
Been thanked: 9 times

Fri May 25, 2007 6:50 pm

wait do you need a coupling, do you use a coupling brian yet you say its airtight
Top
goathunter
Corporal 2
Corporal 2
Posts: 675
Joined: Thu Feb 15, 2007 9:20 pm

Fri May 25, 2007 9:41 pm

A screw type coupler isn't needed to make it air tight but it does simplify the building and alignment.The type in the diagram will work but won't be as air tight as a screw on.
Crazykid,Nerf footballs are always fun for a 2" barrel.Or the old fashioned Spud :)
Top
Post Reply

Return to “General How-To & Discussion”