Price range for these parts at home depot

[mikemurph]

I am going on a spud gun run to Home depot, and I have made a list of parts that I need. I live in dallas and will be going to home depot, so if there are any texas spudders, your price estimate might be the best. I need an estemate of the price for this:

PARTS LIST

PIPE:
5ft OF 2” PVC
5ft OF 1” PVC
5ft OF 1 ½”PVC
5ft OF 3/4” PVC
10ft OF 3” PVC
10ft OF 1 ½” PVC
5ft OF ½” PVC

VALVES:
¾” BALL VALVE
1” SPRINKLER VALVE
(X2)BLOWGUN VALVE
1 ½” BALL VALVE

BENDS:
1” PVC TEE
(X2) 1” PVC 90 DEGREE ELBOWS
(X3) ¾” PVC 45 DEGREE ELBOWS
(X4) ¾” PVC 90 DEGREE ELBOWS
3” PVC TEE
3” PVC CROSS
1 ½” PVC TEE
(X2)1 ½” PVC 90 DEGREE ELBOWS
¾” PVC CROSS
2” PVC TEE

REDUCE BUSHINGS:
(X2) 2”-1” REDUCE BUSHING
1 ½”-1” REDUCE BUSHING
1”-3/4” REDUCE BUSHING
(X3) 3”-1 ½” REDUCE BUSHING

COUPLINGS:
2” PVC COUPLING
(X2) 1 ½” PVC COUPLING
(X5) ¾” PVC COUPLING



END CAPS:
2” PVC CAP
¾” PVC CAP
(X2) 3” PVC CAP
1 ½” THREADED FEMALE CAP
¾” PVC CAP

THREADED ADAPTERS:
(X2) 1” PVC MALE THREADED ADAPTERS
1 ½” PVC MALE THREADED ADAPTER

OTHER:
1’ OF ¼” FLEXIBLE TUBING
3/8” BY ¼” COMPRESSION FITTING
(X2) PSI GAUGE
¾” UNION
sorry I tried to look on line, but the have twice as many kinds of fittings at the stor

[geardog32]

HA! this could be fun if everyone(while not looking it up on the site) made a sort of bet on the price. The winner gets 1000 internets!

my bet $145

[pat123]

I'm would guess somewhere between $150 and 200. I'll guess $178 to try to win the 1000 internets.

The winner gets 1000 internets!

By the way what is an internet?

[spudtyrrant]

my guess is somewhere between $200-$250\my 1000 internets guess is $215
and pat: http://www.urbandictionary.com/define.p ... =internets def 5

[mikemurph]

where are you all from, because i have heard that prices differ by location, and what makes it so expensive, (besides of course the valves)
P.S. I want my 100th post to be a good cannon, so i will reply here
I know, but do you think some of the three inch fittings will add up

PARTS LIST
PIPE:
15ft OF 2” PVC
10ft OF 1” PVC
5ft OF 3/4” PVC
2ft OF 3” PVC
2ft OF 1 ½” PVC

VALVES:
1” SPRINKLER VALVE
BLOWGUN VALVE
1 ½” BALL VALVE (OR 1”)

BENDS:
1” PVC TEE
(X2) 1” PVC 90 DEGREE ELBOWS
(X3) ¾” PVC 45 DEGREE ELBOWS
(X3) ¾” PVC 90 DEGREE ELBOWS
¾” PVC TEE
(X2) 1 ½” PVC 90 DEGREE ELBOWS

REDUCE BUSHINGS:
(X3) 2”-1” REDUCE BUSHING
1 ½”-1” REDUCE BUSHING
3”- 1½” REDUCE BUSHING

COUPLINGS:
2” PVC COUPLING
(X2) 1 ½” PVC COUPLING

END CAPS:
2” PVC CAP
(X2) ¾” PVC CAP
1 ½” PVC END CAP

OTHER:
1’ OF ¼” FLEXIBLE TUBING
3/8” BY ¼” COMPRESSION FITTING
¾” UNION
JB WELD
(X3) 1” PVC MALE THREADED ADAPTERS
HOSE CLAMPS
by cutting away some of the larger fitttings, how much cheaper would this make it?

[suburban spudgunner]

where are you all from, because i have heard that prices differ by location, and what makes it so expensive, (besides of course the valves)
P.S. I want my 100th post to be a good cannon, so i will reply here

Damn! I wasted my 100th post...

I don't think the actual pipe should cost much, but all those small parts really add up in the end. I'm going to hazard a guess at $153.57.

I'z just pullin' that number out for the internetz...

*Edit* I don't know how much they cost in Texas, but in Illinois they cost enough for me to not build a gun with 3 inch fittings. I can't recall a specific price, but they probably will make up a large chunk of the cost.

[jonnyboy]

My guess is 197 dollars.

Your not going to find nsf pw fittings at home depot over 1.5 inches.

[c11man]

i dont usualy shop at home depot but dont they have some 2inch nsf-pw and Home Depot?

[jonnyboy]

i dont usualy shop at home depot but dont they have some 2inch nsf-pw and Home Depot?

At my store nothing is pressure rated past 1.5 inches.

[c11man]

opps, proven wrong again. i deal mostly in large pvc like 4inch. even the occasonaly 4inch sch 80 wye 8)

[MrCrowley]

i dont usualy shop at home depot but dont they have some 2inch nsf-pw and Home Depot?

At my store nothing is pressure rated past 1.5 inches.

Please make that obvious before telling anyone they can't buy anything over 1.5" in pressure rated PVC because I know for a fact you can and i'm pretty sure you know the stock differs from store to store.

I'm going for $123

[Willdebeers]

Im Guessing $156.78 If im right i'll eat my shoe.

[cannon monkey]

my guess is 250-300

mmm i say $254

[theBOOM]

184 dollars here

[cannon monkey]

just like the movie said about jail when your bored you will bet on anything XD