Page 1 of 1
valve Help
Posted: Fri Jul 21, 2006 7:19 pm
by spudfile
Is there a way i can use a 1in.orbit valve on my cannon without modding it
Posted: Fri Jul 21, 2006 7:26 pm
by carlbelcher
Yes, all you have to do is connect a battery(s) (9-24 volts) to the two leads on the solenoid.
If you modify it your gun will shoot a lot better.
Posted: Fri Jul 21, 2006 7:30 pm
by spudfile
dang that is the quickest reply i have ever seen thank you
Posted: Fri Jul 21, 2006 11:57 pm
by Benny
use 3 9 volt batteries.
but modding it increases the power, like 10 times.
Posted: Sat Jul 22, 2006 2:38 am
by carlbelcher
You don't need to use 3 9 volts even 1 will work, I used just 1 before I modified my valve.
Posted: Sat Jul 22, 2006 3:27 am
by L.J.R
If you were to use AC power "power point" you need 24v, If using a battery "DC power" you really only need one 9v battery.
Posted: Sat Jul 22, 2006 4:49 am
by Vb_happiness
All I did was mod a flow control solenoid and leave the solenoid itself in and just cut the wires and screw a 1/4" brass nipple in to go to my dust blower.