Well, here she is. Been working on this cannon for a week now, and Im proud to say that it's done minus a schrader valve for my propane system. 4 inch chamber, sparkstrip, chamber fan, propane, 300k volt stun gun ignition, and interchangable barrels.
The stun gun and fan box are held to the gun via velcro, and yes...the stun gun is set up so i can be easily removed for use on other guns. I forked over 40 bucks for this baby and like to use her on my other cannons. The alligator clips make the gun look a bit tacky I know and the gun itse;f is'nt that amazing to some. She's pretty plan and simple, really simple and plain being there's no paint job yet. I plan on painting it black and yellow with a design and logo on her chamber.
The pictures are kinda crappy being I did them with my web cam, and the lighting was piss poor.
Project Black
-
Ballad_Black
- Specialist
- Posts: 159
- Joined: Sat Oct 15, 2005 10:38 am
- Attachments
-
- Just an overall shot of the gun.
- Picture 004.jpg (10.04 KiB) Viewed 4484 times
-
- Size comparison picture, you can see the barrel in the background =D
- Picture 010.jpg (9.99 KiB) Viewed 4484 times
-
- A picture of the fan with the spark strip going, bad and dark picture, but hey.
- Picture 007.jpg (8.62 KiB) Viewed 4484 times
-
- The spark strip at work.
- Picture 006.jpg (9 KiB) Viewed 4484 times
-
- A close-up of the project box witht he switch on and lit up all pretty like.
- Picture 011.jpg (10.08 KiB) Viewed 4484 times
-
SteamRoller
- Private 2
- Posts: 28
- Joined: Tue Mar 21, 2006 6:27 pm
Damn fine job.
She's a sexy cannon. The Box for the fan is pretty too.
She's a sexy cannon. The Box for the fan is pretty too.
-
Ballad_Black
- Specialist
- Posts: 159
- Joined: Sat Oct 15, 2005 10:38 am
Not sure what you mean by "short design."
I cut the chamber's pipe at 10 inches, but after the couplers and end cap it bounces up to about 12-13 inches roughly. And the barrel is 4 feet and a few odd inches from the threaded connectors.
I cut the chamber's pipe at 10 inches, but after the couplers and end cap it bounces up to about 12-13 inches roughly. And the barrel is 4 feet and a few odd inches from the threaded connectors.
-
spudmonkey
- Specialist
- Posts: 154
- Joined: Tue Feb 14, 2006 5:59 pm
10 inches is kinda short my shortest combustion chamber is 16+couplers and end cap, but nice cannon
-
Ballad_Black
- Specialist
- Posts: 159
- Joined: Sat Oct 15, 2005 10:38 am
Thanks. I tried to get everyhting to line up right and keep the guns primer hidden, I only got 1 spot of purple on the outside, and the 2inch female adapter at the top has a small few millimeter space, but I tried. I still havent fired it, waiting on my Schrader valve to arrive! =D