Paint Ball Sniper
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
This is my 3rd gun, first one with a sprinkler valve (insane improvement from ball valves ). it'll blast a paintball about 75-100yrds with strong wind at about 50psi, i've only shot a tree in my backyard and a skate board, i hit the skateboard from about 20yards at 20psi and hit it dead on with force. i just resantly tryed one of its other barrels (the co2 barrel) and shot through a piece of 1/2" plywood at about 90psi, my friend got a kick out of it. i also shot a trash can lid at 50psi and put a huge dent in it. i havent got around to testing the c-cell battery barrel yet, but i'll inform u of the power if i do. i'll prolly paint it later(idk what color) and make a "barrel extension". The pic that shows all the other barrels. from top to bottom they go: C-cell, AA, Co2(shot through plywood at 85psi), and Paintball (Primary). i fill the gun with a bike pump actually because it takes way to long to fill with my 12v, i need to get a compressor. but the pump actually fills quite well, i got to about 80psi in like 30 pumps, a lot faster then my 12v.
i'll gladly take other suggestions or questions.
I'll try and get more pictures soon. hope u like it as much as i do.
i'll gladly take other suggestions or questions.
I'll try and get more pictures soon. hope u like it as much as i do.
Last edited by iamthewalrus on Thu Jun 09, 2005 2:16 pm, edited 8 times in total.
i got connections with the modfia, watch who ur talkin to noob.
talk to me on AIM at iamthwalrus3
talk to me on AIM at iamthwalrus3
i cant see a pic, just an advertisment that says image hosted by tripod.
yahhhoooo
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
does anyone know how to fix my pic?
- PCGUY
- Owner
- Posts: 1434
- Joined: Wed Aug 18, 2004 10:54 pm
- Location: Illinois
- Has thanked: 2 times
- Been thanked: 26 times
- Contact:
Don't host it on Tripod, upload it here (you see under your post how you can add an attachment if you hit "Add Reply").
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
There, i think i fixed it
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
does no one like my rifle??
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
i posted what they are, the top middle one is a AA battery and the bottom middle is a empty 12g co2. and yes they do major damage, the co2 went through 1/2" plywood at 80-90psi (didnt get an axact mesurment)
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
i have about a 1/2' spread at about 20yrds with the scope, and it can be adjusted, its only sighted in for the paintball barrel though.
- tatorassassinator
- Private 2
- Posts: 22
- Joined: Wed Apr 27, 2005 4:04 pm
- Location: Waubay south dakota
I love PVC rockets for 3/4 barrels. Get a 1/2 inch PVC pipe and flare it the add a LITTLE wieght to it. They fly way better than paintballs. My cuz has one and can shoot cats that are 5o yards away. Rockets are very accurate.
My mommy says im special.
My cats breath smells like catfood.
My cats breath smells like catfood.
- tatorassassinator
- Private 2
- Posts: 22
- Joined: Wed Apr 27, 2005 4:04 pm
- Location: Waubay south dakota
You should have made your air chamber bigger. If you have more air and pressure your projectile will go alot farther. If i were you i would put it up to 120psi. That is the best psi that i shot paintballs with. They dont explode and they fly farther. Put dents in sheets of tin at 80 yards. POWERFUL! If air ever leaks out of you threads then put plumbers putty on the threads. It would way better than tape. I little can of plumbers putty goes along way. Very little is needed for threads.
My mommy says im special.
My cats breath smells like catfood.
My cats breath smells like catfood.
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
my chamber is plenty big, i dented some sheet metal on my uncles farm form about 30yrds at 80psi. i did pump it up to 110psi the other day, it didnt do a whole lot more then 80psi. and i dont need to be shooting 80yrds considering i live in the city and i just shoot st trees in my backyard. also i use apoxy that is pressure rated for over 800psi instead of plumbers putty.
- tatorassassinator
- Private 2
- Posts: 22
- Joined: Wed Apr 27, 2005 4:04 pm
- Location: Waubay south dakota
I gotta few relatives that live in Iowa. What town do you live in. Des Moines?
My mommy says im special.
My cats breath smells like catfood.
My cats breath smells like catfood.
- iamthewalrus
- Corporal
- Posts: 559
- Joined: Mon Feb 28, 2005 9:28 pm
- Location: Iowa (SO BORING!!)
no, but my uncle lives in durant