1.) the is a shell, spherical in shape and pointed near the projectile. I can be any size but preferably 2-5 inches long.
2.) you can precharge the shell by unscrewing the end and spraying hairspray or what ever. in the end of the shell and the unscrewable cap is a small cap gun gunpowder cap. when its struck by the firing pin it creates a small explosion, hopefully exploding the main propellant and gass and explosive force is funelled into the back of the hollowd out bullet, shoves the projectile out the barrel at hopefully acceptable speeds.
to charge and build the shell you need, pzc or metal tube with a thred and cap at one end. drill a hole throught the end of the cap and glue and place the cap gunn cap. whack the other non threaded end into a cylindrecal shap wihich is pointed.
1st open up the threaded cap and sray a burst of your chosen propellant. since the chamber is smaller i think you should spray a second or 2 but always experiment for best results. quickly screw cap back on.
2nd ram the projectile halfway into the cartridge creating an airtight seal and also to create a little back pressure.
insert cartride or shell into clip, breech what ever you want and......hopefuly fire out the end of the barrel. Based on my theory which i thought of my self ages ago and wich im pretty sure no one else did this enables, breech loading, bolt action, semi auto and yes Automatic!!!! please post your ideas.
remember what i said, i do have diagrams, just tell me how to post them. you'll understand it better.
peace-dilweed
