abs gun? any one us it?

A place for general potato gun questions and discussions.
nivekatoz
Specialist 2
Specialist 2
Posts: 237
Joined: Sat Nov 25, 2006 7:05 pm

Fri May 30, 2008 11:55 pm

Just use copper!!! If you can..I have seen guys on youtube using it and I think its very safe.
User avatar
elitesniper
Sergeant
Sergeant
Posts: 1090
Joined: Sat Oct 13, 2007 8:40 pm

Sat May 31, 2008 12:18 am

nivekatoz wrote:Just use copper!!! If you can..I have seen guys on youtube using it and I think its very safe.
He said for combustion, The price 4'', 3'', 2''copper would burn your wallet.
User avatar
magnum9987
Specialist 2
Specialist 2
Posts: 274
Joined: Wed May 07, 2008 5:02 pm

Sat May 31, 2008 8:41 am

Well, you could use abs, even in a pneumatic. All you'd have to do is cover the chamber with extra layers of abs connections. OF course, all it does is boot up the cost, more likely than not, though, the abs covered with connections, would be MUCH more reliable than pvc.
http://www.spudfiles.com/forums/viewtop ... Revolution in the absolute is not initiated by swords, guns, and bullets, but by words-
The New RobesPierre
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

Donating Members

Sun Jun 01, 2008 6:15 am

You mean sliding over some couplers (with the edge thingy dremeled out) ?
Till the day I'm dieing, I'll keep them spuddies flying, 'cause I can!

Spudfiles steam group, join!
User avatar
n-strike
Specialist 2
Specialist 2
Posts: 219
Joined: Sat Apr 26, 2008 3:48 pm
Location: Richmond, BC, Canada

Sun Jun 01, 2008 5:11 pm

I'm in Canada and I'm quite sure PVC is legal...I am pretty sure that PVC is much easier to find than ABS...
TurboSuper
Corporal 5
Corporal 5
Posts: 986
Joined: Thu Jun 16, 2005 1:44 pm
Been thanked: 1 time

Sun Jun 01, 2008 5:19 pm

PVC releases harmful dust when cut, so they want to pass regulations forcing people to use ABS in Canada.

It's still very legal, though. It's not like buying a length will get you thrown in the slammer.
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
User avatar
magnum9987
Specialist 2
Specialist 2
Posts: 274
Joined: Wed May 07, 2008 5:02 pm

Mon Jun 02, 2008 1:06 pm

yeah. The downside is you might as well use pvc if you're going to cover the thing with couplers
http://www.spudfiles.com/forums/viewtop ... Revolution in the absolute is not initiated by swords, guns, and bullets, but by words-
The New RobesPierre
User avatar
Biopyro
Corporal 2
Corporal 2
Posts: 654
Joined: Fri Aug 04, 2006 5:32 am
Location: UK

Mon Jun 02, 2008 1:30 pm

ABS releases far more harmful fumes (to people at least) than PVC! even the relatively small amount of heating in combustion cannons produce unpleasant fumes - take a smell for yourself :tard:
Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -Benjamin Franklin
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Donating Members

Mon Jun 02, 2008 1:49 pm

n-strike wrote:I'm in Canada and I'm quite sure PVC is legal...I am pretty sure that PVC is much easier to find than ABS...
ABS performs better in cold temperatures so you'll see more of it in construction in Canada for that reason. PVC however is certainly still available in Canada.
TurboSuper wrote:PVC releases harmful dust when cut, ...
Just how is PVC dust harmful? The very fact that PVC is used to transport drinking water tells me it's an outstandingly inert material, as far as building materials go anyway. I can see the potential for microfine PVC dust being a respiratory irritant, but certainly not saw shavings. And we are all wearing our dust masks when we sand PVC....aren't we....?
TurboSuper
Corporal 5
Corporal 5
Posts: 986
Joined: Thu Jun 16, 2005 1:44 pm
Been thanked: 1 time

Mon Jun 02, 2008 2:49 pm

starman wrote:
n-strike wrote:I'm in Canada and I'm quite sure PVC is legal...I am pretty sure that PVC is much easier to find than ABS...
ABS performs better in cold temperatures so you'll see more of it in construction in Canada for that reason. PVC however is certainly still available in Canada.
TurboSuper wrote:PVC releases harmful dust when cut, ...
Just how is PVC dust harmful? The very fact that PVC is used to transport drinking water tells me it's an outstandingly inert material, as far as building materials go anyway. I can see the potential for microfine PVC dust being a respiratory irritant, but certainly not saw shavings. And we are all wearing our dust masks when we sand PVC....aren't we....?
I don't make the rules dude, all I know is that there are certain building codes being put into place restricting it's use. PVC also releases a ton of harmful byproducts during the manufacturing process, but I don't know if ABS is any cleaner.
ABS releases far more harmful fumes (to people at least) than PVC! even the relatively small amount of heating in combustion cannons produce unpleasant fumes - take a smell for yourself
Spudding isn't taken into account when building codes are being written :P
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
User avatar
magnum9987
Specialist 2
Specialist 2
Posts: 274
Joined: Wed May 07, 2008 5:02 pm

Mon Jun 02, 2008 2:56 pm

On the topic of drinking water, all most ALL plastics are supposed to be used ONce, or for a small amount of time, to carry water, otherwise they release toxins into water. THat is why disposable water bottles are supposed to be used only once. In addition research is showing that pvc is toxic. I have heard nothing about Abs being toxic though.
http://www.spudfiles.com/forums/viewtop ... Revolution in the absolute is not initiated by swords, guns, and bullets, but by words-
The New RobesPierre
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Donating Members

Mon Jun 02, 2008 3:28 pm

magnum9987 wrote:On the topic of drinking water, all most ALL plastics are supposed to be used ONce, or for a small amount of time, to carry water, otherwise they release toxins into water. THat is why disposable water bottles are supposed to be used only once. In addition research is showing that pvc is toxic. I have heard nothing about Abs being toxic though.
Drinking water containers are PET not PVC. Also, PVC pipe is being used to carry drinking water in 10s of millions of household plumbing everyday and designed to do so for many years. Can you produce the research that shows PVC is at all "toxic"?
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Donating Members

Mon Jun 02, 2008 3:35 pm

TurboSuper wrote:
starman wrote:
TurboSuper wrote:PVC releases harmful dust when cut, ...
Just how is PVC dust harmful? The very fact that PVC is used to transport drinking water tells me it's an outstandingly inert material, as far as building materials go anyway. I can see the potential for microfine PVC dust being a respiratory irritant, but certainly not saw shavings. And we are all wearing our dust masks when we sand PVC....aren't we....?
I don't make the rules dude, all I know is that there are certain building codes being put into place restricting it's use. PVC also releases a ton of harmful byproducts during the manufacturing process, but I don't know if ABS is any cleaner.
Don't get snippy, I'm just asking you to backup your statements with real research and not some greeny propoganda. So we've gone from harmful sawdust to harmful by-products during manufacturing...can you back that up in any meaningful fashion?
User avatar
Biopyro
Corporal 2
Corporal 2
Posts: 654
Joined: Fri Aug 04, 2006 5:32 am
Location: UK

Mon Jun 02, 2008 3:37 pm

Here comes the off topic train! First stop the dangers of bottled water :)
The FDA is worried about chemicals like bisphenol-A being released by the breakdown of plastics into food and water. Simplest solution is just to stop drinking bottled water! Tap water is fine, and the bottles get wasted 90% of the time. I for one definitely think they should be re-used. I certainly always do, even if it's just because they're so expensive :evil:
Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety. -Benjamin Franklin
User avatar
magnum9987
Specialist 2
Specialist 2
Posts: 274
Joined: Wed May 07, 2008 5:02 pm

Mon Jun 02, 2008 3:45 pm

starman wrote:
magnum9987 wrote:On the topic of drinking water, all most ALL plastics are supposed to be used ONce, or for a small amount of time, to carry water, otherwise they release toxins into water. THat is why disposable water bottles are supposed to be used only once. In addition research is showing that pvc is toxic. I have heard nothing about Abs being toxic though.
Drinking water containers are PET not PVC. Also, PVC pipe is being used to carry drinking water in 10s of millions of household plumbing everyday and designed to do so for many years. Can you produce the research that shows PVC is at all "toxic"?
look up pvc on wikipedia and you'll see that studies indicate pvc is releasing poison.
http://www.spudfiles.com/forums/viewtop ... Revolution in the absolute is not initiated by swords, guns, and bullets, but by words-
The New RobesPierre
Post Reply