M25 Sniper potato rifle !
-
thewebb1023
- Private
- Posts: 5
- Joined: Tue Jun 16, 2009 3:08 pm
Very nice. Clean, nice looking and I really like the foam "suppresour".
-
inonickname
- First Sergeant 4
- Posts: 2606
- Joined: Sun Dec 07, 2008 3:27 am
Oh come on all these new guys. You haven't caught up to mike yet but everyone;
Please stop bumping old topics!
Please stop bumping old topics!
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
-
THUNDERLORD
- Sergeant 3
- Posts: 1264
- Joined: Fri Mar 28, 2008 1:42 pm
Seems like a good one to kick up though. 
Just skimmed through the 6 pages and noticed noone had linked to Must be His video I was actually looking for that vid for ideas on a piston and bumper for my own brass design.
I have a 3/4" cast brass "T",
a 3/4-1/2" reducer coupling,
a 1/2" edit:x 2.5" nipple (threaded from inside) (perfect half-way position and adjustable),
a 3/4" close nipple (attaches reducer coupling to front of "T" and 1/2" nipple that will contain BFB fits inside to thread into 1/2" part of coupling)
a 1/2"-3/8" reducer bushing (threaded front of reducer coupling for magazine/ barrel attachment/ front of Blow-forward-bolt).
Planning on using another "T" below that and small brass chamber.
Also, I was trying to decide if it should fill on side of a tiny "T", pilot on right "T" and thread to back of piston/BFB housing ,
OR just fill into the front of chamber(???)
Looks like his does well filling on front of chamber though.
For testing I will probably use my fridge compressor and create a temporary pilot (trigger) using the top of sawn-off threaded type CO2 cartridge (epoxied to reducer bushing, back of 3/4" "T"),
and the top of my CO2 bike tyre filler (valve).
It will be 3/8" ID bore.
BTW, Later I will test a PB gun (with dummy cO2 cart.) for pilot, and get a semi or 3 shot burst one or maybe a use Drozd (sp.),if it works for the pilot.
8)
Awesome thread to "kick-up" IMO.
EDIT:
edited some measurements because all my parts are stuck together now...LOL...they'll get cut down,adjusted and fitted better, with less exposed threads anyway soon.
EDIT2:another vid! (piston looks like a sanded down garden hose cap(?)
Just skimmed through the 6 pages and noticed noone had linked to Must be His video I was actually looking for that vid for ideas on a piston and bumper for my own brass design.
I have a 3/4" cast brass "T",
a 3/4-1/2" reducer coupling,
a 1/2" edit:x 2.5" nipple (threaded from inside) (perfect half-way position and adjustable),
a 3/4" close nipple (attaches reducer coupling to front of "T" and 1/2" nipple that will contain BFB fits inside to thread into 1/2" part of coupling)
a 1/2"-3/8" reducer bushing (threaded front of reducer coupling for magazine/ barrel attachment/ front of Blow-forward-bolt).
Planning on using another "T" below that and small brass chamber.
Also, I was trying to decide if it should fill on side of a tiny "T", pilot on right "T" and thread to back of piston/BFB housing ,
OR just fill into the front of chamber(???)
Looks like his does well filling on front of chamber though.
For testing I will probably use my fridge compressor and create a temporary pilot (trigger) using the top of sawn-off threaded type CO2 cartridge (epoxied to reducer bushing, back of 3/4" "T"),
and the top of my CO2 bike tyre filler (valve).
It will be 3/8" ID bore.
BTW, Later I will test a PB gun (with dummy cO2 cart.) for pilot, and get a semi or 3 shot burst one or maybe a use Drozd (sp.),if it works for the pilot.
8) Awesome thread to "kick-up" IMO.
EDIT:
edited some measurements because all my parts are stuck together now...LOL...they'll get cut down,adjusted and fitted better, with less exposed threads anyway soon.EDIT2:another vid! (piston looks like a sanded down garden hose cap(?)
-----SPEED,STRENGTH, AND ACCURACY.-----
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
"Procrastination" is five syllables for "Sloth".
Theopia 8)
Born To Be Alive!
Love the gun man nice job on it only thing that bugs me is that soda bottle but if you dont my me askigng. is it possible to get that kinda of blow gun in america?spike33 wrote:hi , i want to show you , one of my best airgun ,
there is a 1 meter x 18mm barrel
with a wood bolt action system
the air tank is a coca bottle at 8 bars ( 1.5litres or 0.5 )
i shoot potato and battery
he have a QEV system
on the video i shoot at a a4 paper at 10 meter :
2 liter bottle=disaster, seriously. Other than that, nice gun
"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham
Current Project: None, I'm in Spudremission.
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham
Current Project: None, I'm in Spudremission.
partyars: that gun was built over a year ago... now he has a very nicely built small caliber rifle. i dont even think that this cannon is in one piece anymore haha.
his nice cannon
http://www.youtube.com/watch?v=8YjA6nZzXMg
[/youtube]
his nice cannon
http://www.youtube.com/watch?v=8YjA6nZzXMg
[/youtube]
