full auto

colty-bear · Sat Jul 25, 2009 1:47 am

i am going to make this in rifle form exept attaching it right to feed i am going to use a blowgun to control flow and work as a trigger. he says he shoots it at 30 bar what is that psi? i am going to get an old airsoft gun and sand it out with a mag and a 300mm barrel

also what size brass fitting does a tightbore airsoft barrel go into?

theBOOM · Sat Jul 25, 2009 1:54 am

Hm ok ... yes its possible but you might wanna modify the blowguns spring into a better one so that you can tap it fast and get multiple shoots... im not sure your gonna be able to do full auto... maybe you could get 4-5 shots out of a modded blowgun

As for the barrel... hm not sure the only close barrel to a bb that my plubming shops carry is 6.5 which can be soldered or compressed with a compression fitting ... I dunno really just go to your plumbing shop with a bb and choose a fititng that suits your need...

goodluck

btw 14.5 psi = 1 bar... < next time USE GOOGLE

EDIT: glad you dropped the 500,600,700,800 fps on rubber ball idea...

colty-bear · Sat Jul 25, 2009 1:57 am

lol ye this will be cool but if he was shooting it at sugh low pressure i thing i will get good things out of this

inonickname · Sat Jul 25, 2009 2:06 am

30 bar is low pressure? I haven't even seen you post a gun that even comes close to skimming on that.

Honestly. Google it.

jmadden91 · Sat Jul 25, 2009 3:15 am

Agreed, there are plenty of online converters. Just a google search away

Crna Legija · Sat Jul 25, 2009 5:20 am

30 Bar is 450ish psi. Not low at all

qwerty · Sat Jul 25, 2009 6:26 am

would you make a stock for it? because i recon you could make a nice looking and working gun.

He uses a compressor so i couldn't be that potable so you could use regged HPA.

inonickname · Sat Jul 25, 2009 6:49 am

I don't know if he has access to a HPA setup. By the way have you posted any guns Colty? I can't remember seeing any..

mark.f · Sat Jul 25, 2009 7:34 am

A paintball mine
A paintball rifle
12g powerlet mortar
Another paintball rifle
Cloud BBMG

Practice what 'ye preach!

inonickname · Sat Jul 25, 2009 7:43 am

Bloody hell, I even commented on most of them.

Must be going crazy in my old age.

psycix · Sat Jul 25, 2009 4:27 pm

"He" is right here. What do you need to know?

Note that even when I have the tank on 30 bar, the working pressure of the gun is 8, as the popoff pops out at 8 bar.

jimmy101 · Sat Jul 25, 2009 5:10 pm

psycix wrote:"He" is right here. What do you need to know?

Note that even when I have the tank on 30 bar, the working pressure of the gun is 8, as the popoff pops out at 8 bar.

Psycix: How much of the faster cycling (in the video) is due to the higher pressure in the HPA tank versus the fridge compressor, and how much is due to the much higher flow rate of the HPA tank? It's the high flow rate that actually gives the higher cycle rate isn't it?

Mateo · Sat Jul 25, 2009 6:22 pm

wow colty seems to be the king of ghetto haha. i actually have been slowly collecting parts to make a rifle with this kind of design too... who knows if ill ever get around to makin it...

inonickname · Sat Jul 25, 2009 8:38 pm

Sorry Mateo, but I can think of several people who have made far more ghetto guns than colty-bear..

irisher · Sat Jul 25, 2009 11:04 pm

cough*ckman*cough

full auto

Donating Members

Donating Members