But serious, I do pretty much all my work with a vice, hacksaw, drill (which clamped in the vice is an improvised lathe), hammer, pliers and a set of files.
This is one of the advantages of casting as opposed to having to machine tough materials.
Most useful tool
-
jackssmirkingrevenge
- Five Star General
- Posts: 26189
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 551 times
- Been thanked: 328 times
All in the wiki
But serious, I do pretty much all my work with a vice, hacksaw, drill (which clamped in the vice is an improvised lathe), hammer, pliers and a set of files.
This is one of the advantages of casting as opposed to having to machine tough materials.
But serious, I do pretty much all my work with a vice, hacksaw, drill (which clamped in the vice is an improvised lathe), hammer, pliers and a set of files.
This is one of the advantages of casting as opposed to having to machine tough materials.
hectmarr wrote:You have to make many weapons, because this field is long and short life
5 axis CNC mill & carbide end mills
CNC lathe is a close second
side cutters are right up there
CNC lathe is a close second
side cutters are right up there
Last edited by jagerbond on Sun Dec 27, 2009 2:19 pm, edited 1 time in total.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26189
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 551 times
- Been thanked: 328 times
Now you're just showing off 
hectmarr wrote:You have to make many weapons, because this field is long and short life
They are at the root of nearly everything in our modern day material world, that's pretty useful.
-
boyntonstu
- Sergeant
- Posts: 1039
- Joined: Sun Jun 28, 2009 8:59 am
[youtube][/youtube]
Upside Down Table Saw - Craftsman Radial Arm Saw
Safest way to cut wood.
I stand on the side at the axis of the blade with the stock clamped down.
Nothing can hit me.
Upside Down Table Saw - Craftsman Radial Arm Saw
Safest way to cut wood.
I stand on the side at the axis of the blade with the stock clamped down.
Nothing can hit me.
But I would definitely count hands as tools.Heimo wrote:a lathe is truly the most versatile tool a man can own
Actually, no - scratch that. I'll just count you as a tool instead, it's funnier. :tongue3:
Does that thing kinda look like a big cat to you?
-
clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
A rotary tool, a drill, and a pair of vice grips
A dull knife.... 
Not my favorite, but useful. Sharp enough t cut, yet dull enough so the edge doesn't break when you use it for other things (prying,screws, etc)
Not my favorite, but useful. Sharp enough t cut, yet dull enough so the edge doesn't break when you use it for other things (prying,screws, etc)
Dremel for sure.
mobile chernobyl wrote:I can shoot a Canuter Valve off my '82 Chevy Ram F150 AT LEAST 3/4 Mile with 'ma cannon made of soup cans duct taped together, then I just squirt some bacardi 151 in the chamber and hold up my cigarrete lighta and WHOOSH! That thing flies at least 3/4 mile
-
John Conklin
- Private
- Posts: 12
- Joined: Fri Dec 25, 2009 2:53 am
- Location: Topeka KS
Most productive tools: Paper, pencil, eraser, calculator, computer.
Tools used most in fabrication: Angle grinder, TIG welder, Drill press.
Tools used most in fabrication: Angle grinder, TIG welder, Drill press.
-
deathbyDWV
- Corporal
- Posts: 576
- Joined: Sat May 16, 2009 4:02 pm
- Location: Owasso, OK
Stop showing off John... Haha jk...
We'll probably see some cool stuff from you. (like your marshmallow gun)
...ahem... Back on topic!
Still... DREMEL FTW!!!
And stuff like angle grinder.
Edit... Pencil and paper too I guess... Even though only about 5% of all my sketches and plans actually get built...
We'll probably see some cool stuff from you. (like your marshmallow gun)
...ahem... Back on topic!
Still... DREMEL FTW!!!
And stuff like angle grinder.
Edit... Pencil and paper too I guess... Even though only about 5% of all my sketches and plans actually get built...