Hello this is my first mini (i have built 2 nerf guns) and I would really like feedback on it. I am hopefully going to make another version but I want my next version to be the best it can be. I used a small pill bottle for the chamber and a barrel that fits airsoft bbs extremely loosely.I took the igniter from a lighter and use ax in it. I was wondering if just having bare wires in the chamber for ignition is not the best, should I replace it with nails or screws? also does anyone know if there is a way that I can get a clip and possibly use it for airsoft battles if i had a hop up? I will probably get a tank and compress it with air so I just have to press a blowgun handle to prime it then pull the trigger. Here are some pics:
EDIT: any suggestions please share!!!!
mini pill bottle combustion
-
metalmeltr
- Specialist 4
- Posts: 426
- Joined: Thu Dec 18, 2008 3:42 pm
- Location: united states
I would recomend using a piece of 3/4 pvc or copper to hold the compressed air and use 5/16 metal fuel line as the barrel a blowgun will work for the valve
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
5/16 line is a good fit for airsoft bb's.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
No I don't think using screws makes a difference but it just makes the spark stay in one place because the screws are stronger than a plain wire.
You can get the line, I think it's brake line... at auto stores.
You can get the line, I think it's brake line... at auto stores.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
No problem, it should only be a few bucks for a few feet, far too long for this gun but you can use it for multiple guns.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
Cool, BBMG's are cool too and not that hard to make, just do a lot of research in the Wiki and in the showcase.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
deathbyDWV
- Corporal
- Posts: 576
- Joined: Sat May 16, 2009 4:02 pm
- Location: Owasso, OK
That'll work fine. Good job on the mini... 
Life's too short to mark off the items on your wish list...
