This is my first over-under style gun which all of the parts i got for it were free!except the sprinkler valve. I got all the parts from one of the workers at a reece plumbing store which i befriended and they where doing stock take so he gave me a few piece of pipe and fittings which they didnt want to bother about having to stock take on.I got 2.3meters of class 12 50mm pipe and alot fo fittings and all the 50mm fittings for free.FREE!!!
Its pritty simple and shoots carrots out of sight,which is pritty cool and i also plan on getting a 50mm barrel aswell i still have alot of the 50mm pipe left over from the chamber so all i need is reducers.
Tell me what you think and anything i could add to it.Thanks for your time.
My first over-under cannon.
-
rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
- Attachments
-
- The whole cannon and i am going to make a suport from the chamber to the barrel.
- picet1.JPG (8.88 KiB) Viewed 4429 times
-
- This is the guts of the cannon.
-
- This is my fill in point.Its a female compressor connection which i use with a ball valve to fill it.
MM's!!! AHHHHHH
When carrots take over the world
Nice gun, but why do you need a ball valve to fill the female disconnect, just pull out the male when it's done filling.
I'm going to put a ball valve and a male quick disconnect on one of my guns...
When carrots take over the world
Nice gun, but why do you need a ball valve to fill the female disconnect, just pull out the male when it's done filling.
I'm going to put a ball valve and a male quick disconnect on one of my guns...
-FrOgY-
I wish people would stop needing a better signature!
I wish people would stop needing a better signature!
-
rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
The reason have a ball valve is because on my air compressor i use 2 female conections and i have 2 male connections with a 1/4 ball valve in the middle so i can choose when i want to fill it not just connect and fill.
this is some damage pics from this gun
and this is the crazy johno holding the gun of CARROT DOOM!!!
i shall answer demons question on wat is it with john and carrots and that is that carrots are just so simple to cut up and shove down the barrel when grape season is not on + they leave a cool orange mark where you shot (that is unless if it went through wat you were shooting then yeah you never see any part of that carrot again, this is a personal message from me to everyone out there flowers penatrate the skin even with weak guns so do not ever shoot your friends with flowers caz it will make them bleed isn't that right john...
ohh yeah and grapes make you look like you have a dirty ring worm when you get shot by them so dont shoot your friends with them either caz it does hurt alot, not just a little but A LOT...once again isn't that right john...
ok lets just say don't point your gun at anyone caz that is bad and if the gun missfires then you can expect to be punched in the hea by the person who was in the line of fire...isn't that right ADAM!!! roofing screws hurt the most.
-
killagorrila99
- Sergeant 2
- Posts: 1100
- Joined: Tue Jul 25, 2006 2:35 am
- Location: Australia.
cool. not the best looking cannon on the market but still. how far it shoot?
"I'm sorry, Mr.Bush cant come to the phone right now, He's playing cleudo with Mr. Cheney And he has him in the Cupboard with a broom stick" -White house receptionist.
-
rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
Well i shot a large marble from my house to a beer brewry that is about one and a half city blocks away so i guess...400 meters or more.
EDIT:And isnt payback sweet when u shoot em back lol.Only imagineing shooting some one but that is stupid if u do isnt that right sam shooting people or anything living isn't cool.
EDIT:And isnt payback sweet when u shoot em back lol.Only imagineing shooting some one but that is stupid if u do isnt that right sam shooting people or anything living isn't cool.
we get our solenoid valves from bunnings wearhouse
bunnings sells them from 16-30 dollars, but make sure you get one with "OUT" a guide rod because then they are so much easeyer to modd. the guide rod is a black turning thing and it controls the flow rate so dont get one of thos
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
yeah i know the whole "guide rod" thing.the only sprinkler valve ive ever seen is on trademe buts its $35 incl shipping so i might pop down to bunnings.whats the best brand/model for the price like is the $16models any better then the $30 models?
-
rna_duelers
- Staff Sergeant 3
- Posts: 1739
- Joined: Mon Sep 26, 2005 7:07 am
- Location: G-land Australia
In Bunnings i have only ever seen valves with guide rods they all come standard with it even the ones with out the flow control so what you do is mod the valve the usual way you would and take out the guide rod then fill the hole were the guid rod was wiht epoxy then wait till it is dried and heat a a needle in a flame till its red then poke a small hole through the epoxy,this acts and the equalisation hole thats how i have modded my valves with guide rods and the valve i got from Bunnings was $16 but i think they went up in price now they are about $20.
