Ironically, I measure everything in feetjrrdw wrote:All tools found in the epoxycave are uni-measurable!
The Offcial Machinist Thread: Revised 01/04/2014
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
I'm guessing that's just to compensate for the beaded epoxy so not that critical.dewey-1 wrote:What about the depth of 6mm hole?
Depends on the seasonbare feet or socked feet?
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
This man.... Is a genius.I'm guessing that's just to compensate for the beaded epoxy so not that critical.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Can I get a estimate for the price on this. I need it .750" by 3" long. The back part has to stop the shell from going all the way through the pipe, so if you have a piece of sch 40 3/4" pvc, make sure it won't go all the way through.
- Attachments
-
- Blue, schrader, red, barrels, green, piston, black, body.
- Shotgun cartridge.JPG (11.82 KiB) Viewed 2177 times
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
If the grey parts could be pre-existing pipe, the rest could be machined relatively cheaply and the whole thing epoxied together.
- Attachments
-
- 3inchshotshell.PNG (3 KiB) Viewed 2170 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
This is for my shotgun project, so I need it to be safe to put pressure in, and not have to weaken pvc. I am going to try a version like that, but I would like to know if it can be made?
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
Anything can be made. I'm just suggesting you look for a way to make it easily and quickly with the minimum of machining, so that you can have it cheaplywarhead052 wrote:I would like to know if it can be made?
remember, materials are cheap, time costs much more.
Last edited by jackssmirkingrevenge on Tue Oct 04, 2011 2:51 pm, edited 1 time in total.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
A 12 gram CO<sub>2</sub> capsule fits perfectly.warhead052 wrote:Ok, well any tips on what I should use that will fit in 3/4" pipe?
How many of these are you planning on purchasing?
Also, what's the calibre of the inner pipe?
What pressure do you need it to hold safely?
Mad Bull SS6 cartridges cost $13 each. I doubt anyone will machine, assemble, test and sell you a cart for less.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
I need it to safely hold 200psi, the caliber would be 1/8" ID pex tubing (fits airsoft bb's like a tightbore barrel). As for how many, it would depend on how much it would cost to buy.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
Using delrin/acetal parts, I would say $30 each assembled including schrader. Brass/steel/aluminium parts significantly more. I would consider the commercial item I linked to above before thinking about having them custom made.
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
warhead052
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
-
jackssmirkingrevenge
- Five Star General
- Posts: 26203
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 569 times
- Been thanked: 345 times
A little something I'm making for jakethebeast in exchange for his lovely little blade, I like <s>trucking</s> milling
- Attachments
-
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 8 times
What is it going to be?
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!