Do you ever plan on mounting a proper stock and trigger to fire it from the shoulder?Hybrid ThorJack
-
jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
It is after all a test setup so why not Do you ever plan on mounting a proper stock and trigger to fire it from the shoulder?
Do you ever plan on mounting a proper stock and trigger to fire it from the shoulder?hectmarr wrote:You have to make many weapons, because this field is long and short life
I found this web site which sells small spark plugs and taps.
http://sparkplugs.morrisonandmarvin.com/14-32.php
http://sparkplugs.morrisonandmarvin.com/14-32.php
-
wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
I also had an idea about making a hybrid rifle soon after I bought a strong stainless steel 8mm barrel, but the idea of cartridge it'a really interesting, if a relatively small cartridge (10cm of 3/8 copper) is strong enough to accelerate a 8mm dia steel bb to a average muzzle speed of 200m/s, I'd make it. Are you really going to make that stock? That would be very cool.
CpTn_lAw wrote:"yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
-
wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
yap, I think it´s better, as JSR have proved that valve less cartridges are not very safeyou think integrate a rupture disk in the cartridge?
CpTn_lAw wrote:
-
wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
But the mix will be more difficult to get right, as it´s smaller 
CpTn_lAw wrote:
-
wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
yap, I know, I even have 1 ml syringes 
But I will have to consider seriously about pump dead space, and also a lot of pumping with my shock pump
But I will have to consider seriously about pump dead space, and also a lot of pumping with my shock pump
CpTn_lAw wrote:
-
jackssmirkingrevenge
- Five Star General
- Posts: 26204
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 572 times
- Been thanked: 345 times
Here's the first of the fins for those rods, made with a little more carePetitlu wrote:In fact, the round tungsten have been sent!
I look forward to receiving them
- Attachments
-
hectmarr wrote:You have to make many weapons, because this field is long and short life