Short question topic

Labtecpower · Tue Jul 03, 2012 4:46 pm

Better check twice before buying stuff, mistakes with threading are easy to make

jackssmirkingrevenge · Tue Jul 03, 2012 9:42 pm

Halo96 · Wed Jul 04, 2012 4:48 pm

hey do you guys know
if 1.5" pvc pipe will fit inside of a 2" pvc pipe?
im trying to build a coaxial

mattyzip77 · Wed Jul 04, 2012 5:55 pm

Yes it will but loosly

jackssmirkingrevenge · Wed Jul 04, 2012 11:33 pm

If the 1.5" is your barrel and 2" is your chamber, that's not going to hold a lot of air...

Halo96 · Thu Jul 05, 2012 7:45 am

thanks guys
I think I will use 1" pipe then
instead of 1.5"

killerbanjo · Thu Jul 05, 2012 11:55 am

jackssmirkingrevenge wrote:If the 1.5" is your barrel and 2" is your chamber, that's not going to hold a lot of air...

Thanks mate, thats the most clear table i have seen yet!

jackssmirkingrevenge · Fri Jul 06, 2012 1:24 am

killerbanjo wrote:Thanks mate, thats the most clear table i have seen yet!

No problem

Wait... what?

mattyzip77 · Fri Jul 06, 2012 7:05 am

Jsr I believe he was referring to the thread table..

jackssmirkingrevenge · Fri Jul 06, 2012 7:23 am

Right, carry on

TheNewKid22 · Sun Jul 08, 2012 8:31 pm

Has anyone managed to successfully download ggdt onto a mac? If so could someone put me onto a tutorial sort of thing?

mattyzip77 · Sun Jul 08, 2012 10:42 pm

I have no idea about a mac but on a pc you need to run it as a administrator if that helps.....

Crna Legija · Mon Jul 09, 2012 5:58 am

download it as normal and run is wine.

Zeus · Mon Jul 09, 2012 6:29 am

Buy a PC, run Linux and XP/7 dual boot.

TheNewKid22 · Mon Jul 09, 2012 7:16 pm

Cheers Crna Legija, i'll try that way