"Offtopic-posts-topic" NSFW

[Gippeto]

Sadly i didn't get my 2240 for my project...

WTF Shoot me a pm might be able to help.

tigger....It's a red dot. I like them on pistols...and it's MY pistol.

Barrel and receiver were done with a mix consisting of 2 oz 3% hydrogen peroxide, 1/4 tsp white vinegar and sufficient sea salt to make a saturated solution at room temp.

Barrel is 4140, receiver is 1018 the home brewed solution worked fine on them. The pressure tube is 4130 and would not get past a dark grey even after 20 cycles...used Laurel Mountain barrel brown for 3 rust/boil/card cycles and it went black.

[jackssmirkingrevenge]

I like them on pistols...and it's MY pistol.

One of the advantages of living where you do is that these little babies are available for very little $$$ without a license, something I will be looking forward to...

[Gippeto]

License for a red dot? or the pistol? Thought you had a couple pistols?

By all means though....do be looking forward as this helps prevent the whole "walking into stationary objects" thing.

[jackssmirkingrevenge]

By all means though....do be looking forward as this helps prevent the whole "walking into stationary objects" thing.

Very droll

License for a red dot? or the pistol? Thought you had a couple pistols?

In my current (can I say temporary ) surroundings, you need a police license to purchase an airsoft "weapon" as it is legally considered a firearm, and it needs to be stamped with an individual serial number, which is patently ridiculous.

[Gippeto]

which is patently ridiculous.

No arguement here.

[jsefcik]

I want to shoot soda cans out of my gun ,, does anybody know the correct barrel size ??

I was told its sdr 2 1/2 inch??

If so could I possibly get a piece cash involved!

[tigerblues28]

Yep.
2 and a half. might be a little loose though. but some duct tape wrapped around the can would help.

Nick

[dewey-1]

I want to shoot soda cans out of my gun ,, does anybody know the correct barrel size ??

I was told its sdr 2 1/2 inch??

If so could I possibly get a piece cash involved!

Jessie, invest in a caliper, then you can get your own measurements.
You did not specify which SDR pipe.

Worst Case Wall & OD tolerance in inches
ID ID ID
max nom min

2.608 2.581 2.554 SDR21 Class 200
2.662 2.635 2.608 SDR26 Class 160

Coke can 2.600

[jsefcik]

I want to shoot soda cans out of my gun ,, does anybody know the correct barrel size ??

I was told its sdr 2 1/2 inch??

If so could I possibly get a piece cash involved!

Jessie, invest in a caliper, then you can get your own measurements.
You did not specify which SDR pipe.

Worst Case Wall & OD tolerance in inches
ID ID ID
max nom min

2.608 2.581 2.554 SDR21 Class 200
2.662 2.635 2.608 SDR26 Class 160

I meant to say sdr 21 2 1/2
But does sdr 21 2 1/2 fit normal soda cans???

[MrCrowley]

2.608 2.581 2.554 SDR21 Class 200
2.662 2.635 2.608 SDR26 Class 160

I meant to say sdr 21 2 1/2
But does sdr 21 2 1/2 fit normal soda cans???

I assume SDR21 with a nominal bore diameter of 2.581" is SDR 21 2 1/2". Dewey even listed the diameter of a soda can for you so you could (we all hoped) judge whether it would fit inside one of the two types of pipe he listed.

[mattyzip77]

This is jsefcik were talking about here.... Jesse if a soda can is 2.6 inches will it fit inside a pipe that is 2.581 inches???? Probably not..... So you need sdr 26 2 1/2 inch class 160 pvc pipe....... @ Mr. C , your approaching 10000 posts. For your 10000th post, make it a good one....

[MrCrowley]

I remember when I first joined and some members/moderators used to get annoyed that my "posts per day" was so high, they would've freaked if JSR was a member back then

I'm surprised my 'posts per day' is still over four considering I would probably only average 1-2 posts a day over the last couple of years though I can't find any of my old posts where I state posting milestones.

I did find this though:
December 2007: Total posts: 132,975 within 10,002 topics
October 2008: Total posts: 200,000
April 2013: Total posts: 348,125 within 21,487 topics

Those don't include deleted posts either, which number over 11,000 back in '08. I think now it's about 16,000.

Also, JSR reached 6,000 posts back in June 2008.

[jackssmirkingrevenge]

hehe I'm on 9.71 posts per day I spend far too much time on this forum when I should be making swarf!

edit: here's some artwork I can warm to, amazing!

[youtube][/youtube]

[jakethebeast]

if i understood correctly, Lab is getting a 50cc moped i just HAD to take this clip few days ago. So lab, see if you moped sounds like this

http://www.youtube.com/watch?v=NFq0o8rGeug

[Insomniac]

I found JSR's long-lost American cousin...

[youtube][/youtube]