Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
-
leeeeshad
- Private 2

- Posts: 35
- Joined: Mon Jan 22, 2007 12:56 pm
Thu Mar 01, 2007 1:13 pm
my new copper qev cannon 99cm barrel, 76cm chamber, 3/4 qev (that and the 22mm to 3/4 bsp's from cornish) all 22mm ballvalve piloted with the idea of how to pilot it taken from jim/lsd's shotgun and will shot 150 pages into an argos catalog at 100psi

Last edited by
leeeeshad on Thu Apr 05, 2007 10:40 am, edited 2 times in total.
chubster wrote:how do you saw the head off the nail?
-
noname
- First Sergeant 4

- Posts: 2698
- Joined: Mon Apr 10, 2006 9:19 pm
- Location: Bay Area, CA
Thu Mar 01, 2007 6:36 pm
Nice gun, but how does it shoot? The pilot leads to a dead end, as far as I can see.
-
Hotwired
- First Sergeant 3

- Posts: 2599
- Joined: Fri Oct 13, 2006 5:51 am
- Location: UK
Thu Mar 01, 2007 8:50 pm
If you get a pair of tweezers or a valve tool you can reach inside a schrader valve and unscrew the poppet valve.
What you're left with is essentially a tube and if you close the ballvalve before releasing the pump head the trigger port air is trapped.
Good stuff Leeshad

-
noname
- First Sergeant 4

- Posts: 2698
- Joined: Mon Apr 10, 2006 9:19 pm
- Location: Bay Area, CA
Thu Mar 01, 2007 9:42 pm
Really? Hmm, I might have to see how that works sometime. So it's basically a shrader, but not one way, so it's like a quick connect in the form of a schrader valve, am I right?
-
Hotwired
- First Sergeant 3

- Posts: 2599
- Joined: Fri Oct 13, 2006 5:51 am
- Location: UK
Thu Mar 01, 2007 9:57 pm
Its just a hollow tube that can be connected to a pump once you've taken the valve bit out, I'm not entirely sure about quick connects (don't they have something to seal the end when its released?).
-
noname
- First Sergeant 4

- Posts: 2698
- Joined: Mon Apr 10, 2006 9:19 pm
- Location: Bay Area, CA
Thu Mar 01, 2007 10:35 pm
OK, I thought so.
A male quick connect is just a hollow tube machined to fit inside female quick connects, which are sealed.
-
mark.f
- Sergeant Major 4


- Posts: 3638
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 58 times
- Been thanked: 61 times
-
Contact:
Fri Mar 02, 2007 6:36 am
Great job leeeeshad. What pressures do you normally use this at? I use one of my marble guns, (1/2" QEV into a 1/2" type M copper barrel), routinely at 150 PSI and it almost sounds like a gunshot.
BTW, are you in any way related to the joannaardway of these forums? She said she had a brother who made a copper gun with compression fittings like that quite some time ago...
-
joannaardway
- Corporal 5

- Posts: 949
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: SW Hertfordshire, England, UK.
Fri Mar 02, 2007 10:07 am
No - leeshad isn't my brother.
My brother goes by many internet names, but the one that you're most likely to see is Ragnarok.
He hasn't built any cannons for a while, but you'll know about it when he builds the next one. It'll be (if he sticks to his designs) reasonably impressive.
Novacastrian: How about use whatever the heck you can get your hands on?
frankrede: Well then I guess it won't matter when you decide to drink bleach because your out of kool-aid.
...I'm sorry, but that made my year.
-
leeeeshad
- Private 2

- Posts: 35
- Joined: Mon Jan 22, 2007 12:56 pm
Sun Mar 04, 2007 3:09 pm
no , no relation, i use it at abought 110psi because thats as high as my pump goes, yer sounds like a gunshot so i need a silencer to use it in the garden, joannaardway, are you coming back onto uksgc?
chubster wrote:how do you saw the head off the nail?
-
joannaardway
- Corporal 5

- Posts: 949
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: SW Hertfordshire, England, UK.
Mon Mar 05, 2007 4:28 am
I would have thought it had been fairly obvious!
Yes, I am one of the few of those rare female spudders.
Novacastrian: How about use whatever the heck you can get your hands on?
frankrede: Well then I guess it won't matter when you decide to drink bleach because your out of kool-aid.
...I'm sorry, but that made my year.
-
WOW!!
- Corporal 4

- Posts: 891
- Joined: Thu Mar 16, 2006 9:47 pm
- Location: New jersey
Mon Mar 05, 2007 6:14 am
joannaardway wrote:I would have thought it had been fairly obvious!
Yes, I am one of the few of those rare female spudders.
Wow thats like 1-100,000
Anyways sweet cannon, looks really good, got a video?!
-
mark.f
- Sergeant Major 4


- Posts: 3638
- Joined: Sat May 06, 2006 11:18 am
- Location: The Big Steezy
- Has thanked: 58 times
- Been thanked: 61 times
-
Contact:
Mon Mar 05, 2007 6:47 am
frankrede wrote:
Joannaardway is a girl?
Gosh you're probably tired of answering that!

That's, what, how many times I've heard that?
An innocent mistake, though, seeing as I can't find a legitimate reason for a forum member searching for another one's gender.
