Sparks...
Attach them to a stungun/other high voltage producing circuit.
Normal batteries tend not to make very good sparks.
....unless they're capable of putting out a TON of amps like a car battery in which case make something with very low resistance contacts and push them together manually.
Normal batteries tend not to make very good sparks.
....unless they're capable of putting out a TON of amps like a car battery in which case make something with very low resistance contacts and push them together manually.
Nine volt batteries can make sparks but only if you touched two wires together that were touching opposite plugs. Even then you only get a spark for the first second they touch. You could use the batteries if you controlled the flow of electricity, with a switch. That would create a spark most of the time when you turn the sitch on. It would also help to use more than one battery, all hooked together.
To wire them all you have to do is connect a wire from one to the opposite one on another battery. Once your on you last battery you connect that wire to the opposite one on the first battery and you will get a spark. The spark shows that youmade a circuit.
- singularity
- Corporal 5
- Posts: 982
- Joined: Mon Jun 26, 2006 10:53 pm
- Location: someplace
- Contact:
well... there is this stuff called nickel chromium wire that you can use to light black powder fuses. from what i have gathered its high resistance and low voltages (9 - 12v) cause the wire to produce tremendous heat. ive been working on smelting some of the wire for the past few weeks but cant only get 2000 degrees when i need about 4000 looks like i need some sort of accelerant. i know its not sparks but it might work
be sure to check out my <a href="http://www.spudfiles.com/forums/ak-styl ... 9.html">AK Styled Vortex Gun</a> and my <a href="http://www.spudfiles.com/forums/at-4-t9627.html">AT-4 Rocket</a>
upcoming projects... finalized clip fed BBMG and ball point pen sniper
upcoming projects... finalized clip fed BBMG and ball point pen sniper
- Fnord
- First Sergeant 2
- Posts: 2239
- Joined: Tue Feb 13, 2007 9:20 pm
- Location: Pripyat
- Been thanked: 1 time
- Contact:
I would use an ignition coil if you have a junkyard or any old cars around. A couple 9volts will power them for a while.
For producing heat through resistance I think graphite has a decent amount of resistance if you get it thin enough(mechanical pencil graphite might work). I dont have nickle chromium wire btw.
9 volt batteries can be connected to each other in series just by snapping the connectors together (for anyone who hasnt figured that out yet).
For producing heat through resistance I think graphite has a decent amount of resistance if you get it thin enough(mechanical pencil graphite might work). I dont have nickle chromium wire btw.
9 volt batteries can be connected to each other in series just by snapping the connectors together (for anyone who hasnt figured that out yet).
I can't help thinking hes after a spark that could reliably ignite a combustion mix... in which case the piddly spark straight from the battery is not good enough.
- joannaardway
- Corporal 5
- Posts: 949
- Joined: Mon Oct 09, 2006 4:57 pm
- Location: SW Hertfordshire, England, UK.
What you've said probably won't work that great.
With regards to a capacitor, you'd need to go through a camera flash circuit most likely - which only needs 1.5V.
With regards to a capacitor, you'd need to go through a camera flash circuit most likely - which only needs 1.5V.
Novacastrian: How about use whatever the heck you can get your hands on?
frankrede: Well then I guess it won't matter when you decide to drink bleach because your out of kool-aid.
...I'm sorry, but that made my year.
frankrede: Well then I guess it won't matter when you decide to drink bleach because your out of kool-aid.
...I'm sorry, but that made my year.
Using a single nine volt battery you can ignite black powder fuses with the tungsten filament from a light bulb. Just crack a light bulb open and take out the filament. Then touch the fuse to it and short the battery through the filament. it generates enough heat to make the tungsten glow red and ignite the fuse. This would also be able to ignite materials other than black powder fuses. for example, you could try putting dryer lint or paper or something on the filament to generate a flame.
Or, you could use the battery to ignite steel wool. If you touch the terminals of a 9v battery to steel wool it ignites. I'm not sure how well it would work, but perhaps this could be put to use in a cannon.
Or, you could use the battery to ignite steel wool. If you touch the terminals of a 9v battery to steel wool it ignites. I'm not sure how well it would work, but perhaps this could be put to use in a cannon.
- subterranean
- Specialist
- Posts: 171
- Joined: Sat Oct 21, 2006 11:39 am
- Location: columbus, ohio
ok flamerz 14 just go to lowes or home depot and buy a grill ignitor for 10 bucks, there now your done. but if you must, research how to use a disposable camera for an ignitor(they wotk quite well).