dentlauncher's pneumatic
-
dentlauncher
- Private
- Posts: 18
- Joined: Thu Dec 22, 2005 4:31 pm
this is my first pneumatic http://dentlauncher.tripod.com
Last edited by dentlauncher on Thu Dec 29, 2005 8:49 pm, edited 2 times in total.
-
saladtossser
- Sergeant 3
- Posts: 1234
- Joined: Sat Mar 26, 2005 10:40 am
- Location: Toronto
- Contact:
i am a man who loves safety features. NICE JOB.
"whoa... I thought pimpmann was black..."-pyromanic13
8)-
dentlauncher
- Private
- Posts: 18
- Joined: Thu Dec 22, 2005 4:31 pm
the pic of the hole in the bucket was at 55psi, the spud went through both sides of the cat litter bucket and splatted on the wall
i dont understand what he means by safety featuressaladtossser wrote:i am a man who loves safety features. NICE JOB.
Ok I'm sorry if this comes the out the wrong way but a gun that size and power and the only pic of dmg is a "thin" plastic I belive it can shoot through alot more then that have you tried anything harder?
<img src="http://i4.photobucket.com/albums/y107/LabMinky/labb.jpg" alt="Image hosted by Photobucket.com">
-
dentlauncher
- Private
- Posts: 18
- Joined: Thu Dec 22, 2005 4:31 pm
not yet, i dont want to make (more) holes in my garage
my other gun shot a nail through a 2x8 and it would have gone all the way through but is hit my steel backstop and got flattened.
my other gun shot a nail through a 2x8 and it would have gone all the way through but is hit my steel backstop and got flattened.
-
saladtossser
- Sergeant 3
- Posts: 1234
- Joined: Sat Mar 26, 2005 10:40 am
- Location: Toronto
- Contact:
see those ball valves attached to the tank? that can possibly stop a unwanted discharge.
see those ball valves on the sprinkler valves? that too can stop a unwanted discharge.
see those ball valves on the sprinkler valves? that too can stop a unwanted discharge.
"whoa... I thought pimpmann was black..."-pyromanic13
-
dentlauncher
- Private
- Posts: 18
- Joined: Thu Dec 22, 2005 4:31 pm
how would i be able to trigger the sprinklers at the same time?
The ball valves on the tank are to make the chamber smaller so it is easier to pump. I don't need huge chambers for my mini barrel.
The ball valves on the tank are to make the chamber smaller so it is easier to pump. I don't need huge chambers for my mini barrel.
-
Brian the brain
- Moderator
- Posts: 3497
- Joined: Mon Dec 05, 2005 2:06 am
- Location: Holland
- Been thanked: 6 times
connect the sprinklers to a single ballvalve or blowgun using a T in the middle.THat way you should be able to set them off at the same time
-
dentlauncher
- Private
- Posts: 18
- Joined: Thu Dec 22, 2005 4:31 pm
does a blow gun have enough flow to trigger both sprinkler valves?
-
boilingleadbath
- Staff Sergeant 2
- Posts: 1635
- Joined: Sat Mar 12, 2005 10:35 pm
- Location: Pennsylvania, USA
Yeah. I don't know how well it will trigger them, although it will certainly be better than the soleinoid that comes with them - if you want, you could use a small (3/8") ball valve... it'd be roughly the same price.